VVDI2 V4.8.0 Communication fault with server Solution

Problem:
I would like to update my xhorse vvdi2 in last version 4.8.0/4.8.1 but impossible by update tool.
My remaining synchronization Time is 0 days !
I download in the support the last version, now i have error vvdi2 can’t find.
vvdi2-480-update-error-1
vvdi2-480-update-error-2
Solution:
Maybe it’s server issue. You cannot reach Xhorse engineers these days because they are all on vocation and will be back in next Monday (Dec. 18th, 2017).
If you need to solve the problem urgently, try following:
If your VVDI2 has error “communication fault with server(5) “, try to switch to 3G mobile and try again, don’t use wifi or landline network.
If still doesn’t work, need absolutely use update tool in first before synchronize with the server if your remaining synchronization time is 0 days !
vvdi2-480-update-error-solution
http://blog.vvdishop.com/vvdi2-4-8-0-communication-with-server-failed/

VVDI Prog Read EEPROM 24cxx Series Success

Tried Bosch eeprom and 24xx series and 93xx series with Xhorse VVDI Prog programmer, all working.
First test:
VVDI Prog read 24c02 eeprom
vvdi-prog-24c02-1
vvdi-prog-24c02-2
vvdi-prog-24c02-3
vvdi-prog-24c02-4
vvdi-prog-24c02-5
vvdi-prog-24c02-6
vvdi-prog-24c02-7
tried ST succeed as well
vvdi-prog-24c02-8
vvdi-prog-24c02-9
vvdi-prog-24c02-10
Another customer feedback:
Did some eeproms in circuit with vvdi programmer.
24c32 24c64
Had to try a different brand. Then it worked fine. There is no connection diagnostic warning, like with xprog.
http://blog.vvdishop.com/vvdi-prog-read-24cxx-series-eeprom-in-circuit/

How to Update Condor XC-Mini via Xhorse Update Kit

Here’s the guide to update Xhorse Condor XC-Mini master series automatic key cutting machine software to V4.0.2 or above with multi-language by Xhorse update kit.

 

Power on Condor mini key cutter

update-condor-xc-mini-language-1

current version:  v4.0.1

Download and unzip Xhorse update kit
Copy and paste Upgrade kit on desktop, then open it
Select Condor mini S/N KM02 or KM03 and version 4.0.2
update-condor-xc-mini-language-2
update-condor-xc-mini-language-3
Find device and click on Upgrade
update-condor-xc-mini-language-4
update-condor-xc-mini-language-5
Connect Condor XC Mini to computer via USB cable . Don’t turn ff the software or unplug the USB cable during the upgrade.
Check device connection status and check driver version
Download the latest software and data files
Start updating software and data
Upgrade completed
update-condor-xc-mini-language-6
Current version: 4.0.2

Update VVDI Key Tool to Multi-language Version by XHorse Update Kie

Here’s the instruction on updating  Xhorse VVDI Key Tool remote generator to multi-language version by update kit.
First check the current vvdi key tool version
Turn on device
vvdi-key-tool-multi-language-1
Click Update function
vvdi-key-tool-multi-language-2
check current vvdi remote maker version
SW: V2.0.6
vvdi-key-tool-multi-language-3
Download and unzip Xhorse update kit
Copy and paste Upgrade kit on desktop, then open it
vvdi-key-tool-multi-language-4
vvdi-key-tool-multi-language-5
vvdi-key-tool-multi-language-6
Select device: VVDI Key Tool and update version: 2.0.8
Press Upgrade button to start updating
vvdi-key-tool-multi-language-7
Connect vvdi key tool to computer via USB cable . Don’t turn ff the software or unplug the USB cable during the upgrade.
Check device connection status and check driver version
Download the latest software and data files
Start updating software and data
Upgrade completed
vvdi-key-tool-multi-language-8
Click on Language setting
vvdi-key-tool-multi-language-9
VVDI key tool supports multi-language including English, Turkish, French, Spanish at present.

 

Xhorse VVDI Prog V4.6.5 Software Free on Mega

Xhorse VVDI PROG programmer latest software version V4.6.5 released.

————————————-
VVDI-Prog v4.6.5 (2017-11-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.5 version in Doc folder
+ Update V850 D-Flash format conversion tool, support insert with original 64KB file
* Fix EEPROM CLIP ADAPTER R&W some chips error problem
* Fix EWS3 ADAPTER sometimes insertion check error problem
* Fix 35080/D80 ADAPTER erase some 35080VP first 32 Bytesfailed problem
+ Add MC68HC05B32(0D60J), MC68HC05B32(3G96A), MC68HC705B16(1K20C) options in <2-MCU>-><MOTOROLA-MC68HC(7)05> (Need MC68HC05BX ADAPTER)
+ Add MC68HC05X32(0D69J), MC68HC05X32(1D69J), MC68HC05X32(1H52A), MC68HC705X32(0G47V) options in <2-MCU>-><MOTOROLA-MC68HC(7)05> (Need MC68HC05X32 ADAPTER)
+ Add MC68HC05E6(0F82B) option in <2-MCU>-><MOTOROLA-MC68HC(7)05>
+ Add EMS6104(AM29F400BB), SIMTEC76(29F400BB) options in <3-ECU>-><SIEMENS>
+ Add SIMOS9.4(AM29F400BB) option in <3-ECU>-><VOLKSWAGEN>
+ Add IRAN(2014-2017)(29F400BB) option in <3-ECU>-><OTHERS>
+ Add BJ40-BCM(2016), E150-BCM, HUANSU-S3-BCM options in <4-IMMOBILIZER>-><BAICMOTOR>
+ Add SPRINTER-IMMOBOX(2002-2005) option in <4-IMMOBILIZER>-><BENZ>
+ Add BESTURN-B70-BCM(MC9S12XEG128) option in <4-IMMOBILIZER>-><FAW>
+ Add BSI option in <4-IMMOBILIZER>-><FIAT>
+ Add ELANTRA-KG-MODULE(MC9S12XEG384) option in <4-IMMOBILIZER>-><HYUDNAI>
+ Add IMMOBOX(STM8AF6288) option in <4-IMMOBILIZER>-><TUNGTHIH>
+ Add EXCELLEGT(D70F3423) option in <5-DASHBORAD>-><BUICK>
+ Add ARRIZO7-DASHBOARD(2015)option in <5-DASHBORAD>-><CHERY>
+ Add K50-DASHBOARD(2015) option in <5-DASHBORAD>-><KARRY>
+ Add REGAL-SRS(MC9S12XEG384) option in <7-ARIBAG>-><BUICK>
+ Add ASTRA-SRS option in <7-ARIBAG>-><OPEL>
+ Add SRS-VW61 option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add ISM(ST10F269), S-CLASS-W221-FRONT-SAM options in <8-OTHER>-><BENZ>
+ Add SORENTO-IPM option in <8-OTHER>-><KIA>
+ Add PASSAT-PDC-MODULE, REAR-VIEW-CAMERA(D70F3356), TIGUAN-KG-MODULE(MC9S12XET256) option in <8-OTHER>-><VOLKSWAGEN>

www.vvdishop.com

Xhorse Condor XC-Mini V4.0.2 Update Fetaures

Dear users, this is Xhorse new update Kit for online updating.
currently support update devices as follow:
VVDI KEY TOOLVVDI PROGVVDI2VVDI MB TOOL 
VAG Iscancar VAG MM-007   Condor XC-MINI(KM02/KM03) Condor XC-007 key cutting machine
Notes: for VVDI KEY TOOL please use new update Kit to update, don’t use old version software.

xhorse-update-tool

Free download Xhorse Update Kit

 

Update today:

Condor XC-Mini update to V4.0.2

Condor Mini (KM03) 4.0.2
+ Add universal key decode function
+ Add M2-D function
+ Add motor sensor testing function
* Modify probe/cutter detection
* Fix machine may crash error problem
* Fix HU49 key decode error
* Fix Fix HU66 cutting speed issue

Possible to renew original Mercedes keys for refuse?

As titled, possible to renew original keys for reuse with VVDI MB BGA Tool key programmer? and how?
Solution:
If it is nec key,  YES
if BGA key, will not.
lot of tools do it renew
vvdi mb bga,ak500, cgdi mb…
How many types of Mercedes NEC key?
v51 v57
v28 v35 v40 v51 v57
v03 v06 v07 v08 v09 v61
v28 v35 v40 v51 v57
v03 v05 v06 v07 v08 v09 v59 v61
mercedes-nec-type
Here’s the guide on renewing NEC 57 key with VVDI MB Tool.
Put the NEC57 key chip on VVDI NEC Key Adapter
vvdi-nec-key-adapter
Put NEC Key Adapter on VVDI MB
Connect VVDI MB Tool with laptop and open latest VVDI MB software.
Now you can start to virgin Mercedes NEC57!
Select mode “NEC Adapter” then choose type “V51, V57”.
vvdi-mb-renew-nec-key
“Identification key”
VVDI MB will read NEC V57 key info successfully!
Key number is 1.
vvdi-mb-renew-nec-key-2
“Renew” to virgin NEC V57 key.
Wait a while key erasing complete 100% and success!
vvdi-mb-renew-nec-key-3
“Identification key” again and read key info to check if key is successfully erased.
And you can see now key information is blank and things done!
vvdi-mb-renew-nec-key-4
Done!

VVDI Key Tool Clone Renault Duster Remote Key Guide

Renault Duster remote cloning using Xhorse VVDI Key tool remote maker. Suitable for Renault Logan, Renault Duster etc.

 

What you need:

Original key

XHORSE DS Type Wireless Universal Remote Key 3 Buttons

VVDI Key Tool remote generator

 

 

Easy steps goes below:

vvdi-key-tool-renault-duster-1vvdi-key-tool-renault-duster-2

In VVDI key tool, select Remote Clone->Special Clone

vvdi-key-tool-renault-duster-3vvdi-key-tool-renault-duster-4vvdi-key-tool-renault-duster-5vvdi-key-tool-renault-duster-6

set frequency to 434.00 and select Clone

vvdi-key-tool-renault-duster-7vvdi-key-tool-renault-duster-8

Clone success

vvdi-key-tool-renault-duster-9

Install battery and re-install universal remote key

vvdi-key-tool-renault-duster-10vvdi-key-tool-renault-duster-11vvdi-key-tool-renault-duster-12

Test the cloned remote key.

vvdi-key-tool-renault-duster-13

Working !!!

www.vvdishop.com

VVDI2 VAG Program VW 4th ID48 All Keys Lost

Guide to program VAG 4th generation immobilizer Magneti Marelli engine NEC+35XX all keys lost with Xhorse VVDI2 VAG key programmer.
Tools used:
VVDI2 Copy 48 Transponder Authorization (English version is not yet available)
Xhorse ID48 Chip (OEM key)

Guide:

Step 1: Read 95320 eeprom data
Disassemble ECU
vvdi2-4th-immo-all-key-lost-1
Read CPU IC 95320 eeprom data with VVDI Prog and save data
vvdi2-4th-immo-all-key-lost-2
vvdi2-4th-immo-all-key-lost-3
vvdi2-4th-immo-all-key-lost-4
Step 2: Calculate CS and PIN
Open VVDI2 VAG software->Special Function-> EEPROM Dump Tool->Benzina MM7GV (Polo, Skoda) NEC35XX Dump 95320->Upload data
Calculate CS and PIN
Take a screenshot or write down CS and PIN
vvdi2-4th-immo-all-key-lost-5
vvdi2-4th-immo-all-key-lost-6
vvdi2-4th-immo-all-key-lost-7
Step 3:  Program Dealer Key
Re-install ECU back to vehicle
Connect VVDI2 key programmer with vehicle
Select Key Learn->4th Immobilizer->Copy ID48 transponder
Select 2nd option: having dump CS and PIN
Manually enter CS and Pin calculated from Step 2
vvdi2-4th-immo-all-key-lost-8
Select Collect data
vvdi2-4th-immo-all-key-lost-9
Must connect laptop with internet to calculate key data
Then save data
vvdi2-4th-immo-all-key-lost-10
Data generated can be used to copy key, generate key, generate dealer key and learn key.
vvdi2-4th-immo-all-key-lost-11
Here all keys have lost, so press NO to continue
vvdi2-4th-immo-all-key-lost-12
Put OEM key (ID48 chip) into VVDI2’s coil and click on YES
vvdi2-4th-immo-all-key-lost-13
vvdi2-4th-immo-all-key-lost-14
Generated dealer key completed and locked
vvdi2-4th-immo-all-key-lost-15
Program key success. Try to start car with the new key.
vvdi2-4th-immo-all-key-lost-16
Done!

Step to Program Porsche Cayenne 2008 All Keys Lost by VVDI2

Here’s the demo guide on how to program new key for Porsche Cayenne when all keys lost.
Fold keys are divided into two frequency, 315M is the ordinary fold, and 433M smart key, both of them can use write start all key lost. Below is operation procedure in detail.
For Porsche Cayenne Key Programming:
Porsche-cayenne
1.Dismantle the KESSY Module
Under the steering wheel to find KESSY computer, dismantle the KESSY Module. As shown below, a black box.
kessy-module
Open the shell, in the computer board near the CPU to find 8 pin chip, model num is 93C86. Use programmer, VVDI Prog, Xprog etc to read the data.
porsche-93c86-1
porsche-93c86-2
2.Write start key
Use TM100 Transponder Key Programmer, VVDI or other wirte start device to load the data that read from 93C86 chip. The following I use VVDI make a demo:
1)Open the VVDI2 Key Programmer Software,then select “Immo data processing tool”,”Porsche”, Car Model”Cayenne”,type”93C86″
vvdi2-program-porsche-cayenne-key-1
2)Then load in the data form 93C86 Chip,VVDI2 will display the key information include “ID” and “Key Number” and so on.Put a new key into the VVDI2 coil.Click to generate dealer key,the device will generate a new 93C86 file(save it),and it will remind you that”the dealer key generate successful”.
vvdi2-program-porsche-cayenne-key-2
3)Load the new 93C86 file into Xhorse VVDI2 to check 3 key information in the data as shown below.
vvdi2-program-porsche-cayenne-key-3
4) Use the VVD2 write the new 93C86 file back in 93C86 chip and weld it back on KESSY Computer,assemble KESSY on your car.
vvdi2-program-porsche-cayenne-key-4
Done.
Reference:

How To Add New Key For Porsche Cayenne

For Porsche Cayenne made before 2004.06:
Read out immobilizer PIN,and then short circuit pin 3 to pin 7 of OBD port with 5053.
Then you can start program key
For Porsche Cayenne made from 2004.06 to 2006:
Read the immobilizer PIN by programmer,but it can not program key by common key programmer.(Only by VVDI Programmer or Original manufacturer device)
For Porsche Cayenne made from 2007 to 2010:
Some Porsche Cayenne made during this period can do key programed by VVDI device.
And for others,you need to remove the ECU,disassemble the storager chip,near CPU,typed 95160.
Read out the data file by programmer.
Open the data file.
The pin code locate at section 040 and 060,12th and 13th byte. Convert the hex system to decimalism,then you get the PIN.
Note:Before you program for next key,insert the key to ignition and turn it the “ON” position,but do not start the engine,and wait for 3 seconds,then you will sound the “beep” of unlocking.
Turn off the ignition,and then you can start programming next key.

How to Calculate Porsche Cayenne PIN Code

If you ever programmed keys for Porsche Cayenne,it needs PIN code for programming. But in some situation,you can not read out the PIN code by Key Programmer.And you must to remove the ECU,and read out the data file from a chip 95128,and then calculate data file to obtain the PIN.And here’s the guide on how to calculate PIN code for Porsche Cayenne and Tiguan 2009.
porsche-key
For Posche Cayenne and Tiguan made after 2009,you must remove the ECU to get the PIN code.
How to calculate PIN code:
1. Remove ECU form vehicle
2. Locate the chip 95128 near the CPU,and remove the 95128 chip from ECU PCB by soldering iron.
3. Read out the data file from 95128,and save it on the laptop.
4. Calculate the PIN code from data file.
AS below show,the 1A15 is the pin code. Convert it from hex adecimal to decimalism is 5402.
porsche-pin-code