Read 2014 Kia Sportage pin code and Program Remote with VVDI Key Tool

As titled, here’s the step-by-step guide on 2014 Kia Sportage keyless entry remote fob programming using Xhorse VVDI Key Tool remote generator.
Device used:
VVDI universal remote for VVDI Key Tool
Step 1: Read PIN Code
vvdi-key-tool-kia-sportage-1
Insert original remote into left coil of Keytool
Select Automatic Detection Clone
vvdi-key-tool-kia-sportage-2
Detect remote type: ID46 HITAGS PCF7936
vvdi-key-tool-kia-sportage-4
vvdi-key-tool-kia-sportage-5
Connect vvdi remote pcb with VVDI Keytool
Select Remote Program->Asia->Kia->Sportage->NYODD4TX1306-TFL 14-16
vvdi-key-tool-kia-sportage-6
vvdi-key-tool-kia-sportage-7
vvdi-key-tool-kia-sportage-8

 

vvdi-key-tool-kia-sportage-9
vvdi-key-tool-kia-sportage-10
Remote frequency 433MHZ
Writing data
vvdi-key-tool-kia-sportage-11
Write data success.
vvdi-key-tool-kia-sportage-12
Now start to read the pin code via the key
vvdi-key-tool-kia-sportage-13
vvdi-key-tool-kia-sportage-14
vvdi-key-tool-kia-sportage-15
Select Mode1 data acquisition mode
Put the KEYTOOL head antenna near the ignition coil, press OK to sniff data
vvdi-key-tool-kia-sportage-16
Insert the original key into the left coil and press OK to start the calculation.
In calculate progress, don’t move the key.
vvdi-key-tool-kia-sportage-17
Calculate success.
vvdi-key-tool-kia-sportage-18
Move to get More Function
vvdi-key-tool-kia-sportage-19
Select Hyundai Password
vvdi-key-tool-kia-sportage-20
VVDI Key tool read password success.
Step 2: Program remote
Now we will do remote programming with Xtool X100 PAD2
xtool-x100-pad2-kia-sportage-1
Select Immobilizer->Kia->Program Immobilizer/Remote->Select from type->Program remote->16 PIN->Type 1->Program remotes
xtool-x100-pad2-kia-sportage-2

 

xtool-x100-pad2-kia-sportage-3

 

xtool-x100-pad2-kia-sportage-4
Switch on ignition and turn off, then remove key
xtool-x100-pad2-kia-sportage-5
xtool-x100-pad2-kia-sportage-6
Program remote: press LOCK or UNLOCK for more than 1 sec.
xtool-x100-pad2-kia-sportage-7
Remote programming complete, click YES to program next remote.
xtool-x100-pad2-kia-sportage-8
Press LOCK or UNLOCK button of vvdi remote key for more than 1 sec
xtool-x100-pad2-kia-sportage-9
Program complete
Step 3:  Make key programming
Now we make key programming process
xtool-x100-pad2-kia-sportage-10
Select Type4 (CAN)->Program keys
xtool-x100-pad2-kia-sportage-11
Insert a key to be programmed, turn ignition on.
Xtool X100 PAD2 will ask pin code to access.
xtool-x100-pad2-kia-sportage-12
Enter pin code read by VVDI Key Tool
1st key program success
xtool-x100-pad2-kia-sportage-13
Press YES to program next key.
Insert next key to be programmed. Turn ignition on.
2nd key program success
xtool-x100-pad2-kia-sportage-14
Turn ignition off, wait for 10 seconds, then turn ignition on
Programming is completed.
xtool-x100-pad2-kia-sportage-15
Test the new vvdi remote, works no issue.

http://www.vvdishop.com/service/vvdi-key-tool-read-2014-kia-sportage-id46-pin-code-8067.html

Leave a Reply

Your email address will not be published. Required fields are marked *