How to Modify Smart Key Button Distance with VVDI Mini Key Tool ?

How to use Xhorse VVDI Mini Key Tool to modify smart key button data? Locksmiths may need the tip when making a smart key. Here is the procedure with VVDI Mini Key Tool, it is suitable for VVDI Key Tool Max as well.

 

VVDI Modify Smart Key Button Distance 1

 

 

Procedure

  1. Go to main menu after connecting with VVDI Mini Key Tool.

Vehicle remote >> Chrysler >> All remotes >> Chrysler KeylessGo ID46 433M

 

VVDI Modify Smart Key Button Distance 2

 

 

 

  1. Modify button-distance >> Read

Smart key data will come out after press “Read”. If we found the “Lock” button is contrary to “Trunk” button, press them to correct the data.

 

VVDI Modify Smart Key Button Distance 3

 

 

 

Modify “Lock” button from 2 to 4, press “OK”.

Modify “Trunk” button from 4 to 2, press “OK”.

 

VVDI Modify Smart Key Button Distance 4

 

 

 

We can also modify the “Frequency” and “Baud1”.

It is benefit for the situation when the remote distance is too short to work well, it would be work. For example, the frequency is 433.899, we edit it from 433.899 to 433.919, and we edit baudi1 from 7800 to 7600. When the keyless go function does not work well, try to adjust baud2 from 7800 to 7700 either.

 

VVDI Modify Smart Key Button Distance 5

 

 

  1. Write data to smart key

Press “Write” button to save the new remote control distance and sensing sensitivity data to smart key.

 

Write OK. It is done, no need to match the vehicle again.

 

VVDI Modify Smart Key Button Distance 6

 

 

This is a tech tip of fine tuning smart key remote control distance and sensing sensitivity data with VVDI Mini KeyTool.

 

Good luck!

 

https://www.vvdishop.com/

Leave a Reply

Your email address will not be published. Required fields are marked *

− 5 = 1