Xhorse VVDI2 Program Golf 4 Transponder Key via Super Chip

This is an operation tutorial of how to use Xhorse VVDI2 VAG key programmer and vvdi super chip to program a key for VW Golf 4.

 

Procedure:

Start up VVDI2 quick start, click VW, wait until connecting to device successfully.

 

Special function >> K-line instrument/immobox >> Read EEPROM

 

Connecting to device, please wait…

 

Start transfer/receive data…

 

Reading address…

 

Reading data success.

 

Copy the PIN code 04376, close the window, go access to “Transponder Programmer”.

 

vvdi2-golf4-key-1

 

vvdi2-golf4-key-2

 

vvdi2-golf4-key-3

 

vvdi2-golf4-key-4

 

 

Click “Autodetect Transponder” to get transponder information.

 

VVDI super chip >> Set transponder type >> MEGAMOS 48 >> Reset VVDI super chip >> Yes

 

Resetting…success

 

vvdi2-golf4-key-5

 

vvdi2-golf4-key-6

 

vvdi2-golf4-key-7

 

vvdi2-golf4-key-8

 

vvdi2-golf4-key-9

 

 

Exit to click “Autodetect Transponder”, the transponder information has changed.

 

VVDI super chip >> Set transponder type >> MEGAMOS 48 >> Set

 

Setting Xhorse super chip type…success

 

Exit to click “Autodetect Transponder” again, the transponder information is same as first time.

 

vvdi2-golf4-key-10

 

vvdi2-golf4-key-11

 

vvdi2-golf4-key-12

 

 

Close the window, go back to VW

 

Key learn >> Key learn

 

Paste the pin code 04376 on “Login(PIN)”, click “Learn”.

 

Switch ignition off for 5 seconds, then switch on, click “OK”.

 

Switch off ignition. Insert every key to ignition and switch on at least 2 seconds. Click “OK”.

 

Adaption finished.

 

vvdi2-golf4-key-13

 

vvdi2-golf4-key-14

 

vvdi2-golf4-key-15

 

vvdi2-golf4-key-16

 

vvdi2-golf4-key-17

 

 

 

Done!

 

Above are a quick demonstration of using VVDI2 full Commander to program super chip for a VW Golf4. Thanks to https://www.vvdishop.com/

Leave a Reply

Your email address will not be published. Required fields are marked *

49 − 44 =