Program Toyota G Chip ID72 Key by VVDI Mini Prog + Key Tool Max

How to use Xhorse VVDI Mini Prog + VVDI Key Tool Max to program Toyota a G chip ID72 key by reading EEPROM? As below is a demonstration step by step.

 

Tools

Toyota ECU immobilizer model

VVDI Mini Prog

VVDI Key Tool Max

 

Take out the EEPROM chip from outer shell, clean the chip pin for ready.

Power on Mini Prog, connect it with Key Tool Max.

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 1

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 2

 

 

Procedure

  1. Read EEPROM

Hold Mini Prog straightly to connect with EEPROM chip, press

EEPROM and FLASH >> ST >> M98CX6 >> M93C66(pressure) >> Read >> EEPROM >> Start operation >> Continue

 

Wait for reading…

 

Rename, press “OK” to save.

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 3

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 4

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 5

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 6

 

 

  1. Program dealer key

Go back to Xhorse Key Tool Max function page, press

Special function >> Immo data tool >> Asia >> Toyota >> G-transponder >> G-transponder – 93C66 >> Start execution

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 7

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 8

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 9

 

Find and select the data file saved just now.

 

Attention: genuine key only, press “OK”.

 

Select an unused position: Key 3, press “Prepare dealer key”.

 

Select “ID67G(ID68G, ID70G)”, press “OK”.

 

Prepare dealer key success.

It can start engine after write back new dump file. Add another new key need load the new data file.

Press “OK” to save the new dump file.

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 10

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 11

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 12

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 13

 

 

Save file >> Save

 

Save file success, press “OK”.

 

Let’s go back to see Key 3, it has been used now.

Done!

 

VVDI Mini Prog + Key Tool Max Add Toyota G Chip ID72 Key 14

 

 

Using VVDI Mini Prog & Key Tool Max to do Toyota a G chip ID72 key programming successfully!

https://www.vvdishop.com/

http://blog.vvdishop.com/xhorse-mini-prog-key-tool-max-program-toyota-g-chip-id72-key/

Leave a Reply

Your email address will not be published. Required fields are marked *

47 + = 48