Xhorse Mini Prog + VVDI Key Tool Max Program 2013 VW CC 95320

How to use Xhorse Mini Prog + VVDI Key Tool Max to program a dealer key M95320 for 2013 Volkswagen Passat CC? Today I’ll demonstrate it on bench.

 

Read & Save EEPROM

Remove the outer shell to take out chip.

Hold and push Mini Prog straight down on the M95320 chip.

Press on Key Tool Max meanwhile,

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-1

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-2

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-3

 

 

EEPROM and FLASH >> ST >> M95XXX >> M95320(pressure) >> Read >> EEPROM >> Start operation >> Continue >> Rename, OK

 

(Note: DO NOT lay down Mini Prog during reading.)

 

Read & save EEPROM file successfully.

The Mini Prog screen will show an OK button, which means “Done”.

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-4

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-5

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-6

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-7

 

 

 

Program Dealer Key

Switch to Xhorse Key Tool Max function page, press

Special function >> Immo data tool >> Europe >> VW >> Passat >> Comfort ID48 – 95320 >> Start execution >> Load EEPROM file

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-8

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-9

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-10

 

 

Select an unused key position: key 4, press “Prepare dealer key”.

 

Select “Megamos 48”.

Place a new key into Key Tool Max coil.

OK >> OK

 

Prepare dealer key success.

It can start engine after write back new dump file.

Press “OK” to save the new dump file.

Rename, save >> OK

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-11

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-12

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-13

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-14

 

 

Let’s go back to Xhorse Mini Prog page to write new dump file.

EEPROM and FLASH >> ST >> M95XXX >> M95320(pressure) >> Write >> EEPROM >> Start operation >> Select dump file to load

 

Turn on Mini Prog and hold it straight on M95320 chip again.

Start operation >> Continue

(Note: DO NOT lay down Mini Prog during writing.)

 

Write completely.

Key programming has done!

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-15

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-16

 

 

Program 2013 VW Passat CC a M95320 key with Xhorse Key Tool Max & VVDI Mini Prog was successful!

https://www.vvdishop.com/

Leave a Reply

Your email address will not be published. Required fields are marked *

43 − 41 =