Xhorse MVCI Pro ODIS V23 Test Report

Xhorse MVCI Pro J2534 was tested working with VW Audi Skoda Seat ODIS-S service software V23 and ODIS-E Engineer software V17.


xhorse mvci pro


Software version: ODIS-S V23.0.1/ ODIS-E V17.01

odis-e v17

odis s v23

License: Included License Standalone and License for all brand

Compatible device: Xhorse MVCI Pro (and other passthru devices VXDIAG VCX SE 6154, openport 2, vnci 6154a, godiag j2534 etc)

Operating system: Win10 or later O/S, RAM>4G. Win7 is not supported since this version.

Language: Multi-language


Both software can be downloaded for free. But not include keygen.


If need activation, contact


We will send software in U disk format which contains 1 time free activation for both ODIS-S and ODIS-E software.



Tested models by far:

Model VIN ECU Type Protocol ODIS S 11 ODIS S 23.0.1 ODIS E 17.01
2007 AUDI A6 LFV3A24F273054910 MED9.1 KWP2000
2005 VWCaddy LFVBC32K053000112 EDC16U1 KWP2000
2007 VW Passat WVWVU73CX7E001193 CAN BUS
2017 VW Passat LFV3A23C5H3071340 SIMOS 18.3 CAN BUS
2008 Audi A6 WAUDH74F98N068455 SIMOS 6.22A CAN BUS
2008 VW Passat LFV3A23C583003748 MED17.5 CAN BUS MVCI Pro supports full system diagnostics (other J2534 only OBD scan)
2008 AUDI A6 LFV5A24F783014364 SIMOS 8.10 CAN BUS X X


Steps to Install ODIS-S/ODIS-E

1.Install Setup

2.Activate software

3. Install PostSetup

4. Install driver

5. Run software


MVCI Pro J2534 driver is included in the U disk.

mvci pro j2534 driver


Leave a Reply

Your email address will not be published. Required fields are marked *