Xhorse VVDI Key Tool Plus Program BMW CAS++ AKL via OBD

It is recommended to program BMW CAS3++ (ISTAP) CAS4+ all keys lost on bench because it is safer than via OBD.  Xhorse VVDI Key Tool Plus pad has the capacity program CAS3++ AKL via OBD and customer have tested it successfully.  Check step-by-step guide below.  Make sure you have enough power supply.

 

 

Vvdi key tool plus bmw cas 3 ++ istap all keys lost all the process:

Connect key tool plus pad with vehicle via OBD socket using main test cable

Select IMMO Programming->Europe->BMW->Automatically diagnose models

 

vvdi-key-tool-plus-bmw-cas3-akl-1

 

vvdi-key-tool-plus-bmw-cas3-akl-2

 

 

Key Tool plus pad will detect system type: CAS3++ (ISTAP)

 

vvdi-key-tool-plus-bmw-cas3-akl-3

 

vvdi-key-tool-plus-bmw-cas3-akl-4

 

 

Select Generate keys via OBD->Read Key information

 

vvdi-key-tool-plus-bmw-cas3-akl-5

Here all keys are lost, insert a blank key into ignition switch and connect the vehicle and device well
Click “NO” for All keys lost

 

 

vvdi-key-tool-plus-bmw-cas3-akl-6

Reads key info. 2003 315MHz
The dealer key should be taken away from ignition switch
If key is keyless, move it out of car
If there’s no key in ignition, continue anyway

 

 

vvdi-key-tool-plus-bmw-cas3-akl-7

 

vvdi-key-tool-plus-bmw-cas3-akl-8

 

 

Reading key info (2 keys have been programmed to this car) and save

Select Prepare dealer key with programmer

 

vvdi-key-tool-plus-bmw-cas3-akl-9

select an unused key position

 

CAS key data is encrypted. support make dealer key for it.
All keys lost require ECU ISN code
If you have ISN code, enter ISN code and continue
Here we don’t have ISN code, press No

 

vvdi-key-tool-plus-bmw-cas3-akl-10

and continue

 

Lost all working key, press Yes

 

vvdi-key-tool-plus-bmw-cas3-akl-11

The dealer key should be taken away from ignition switch

 

 

vvdi-key-tool-plus-bmw-cas3-akl-12

Read EEPROM file first for this type, then run File Make Key for this type

 

 

vvdi-key-tool-plus-bmw-cas3-akl-13

Select eeprom bin file saved on the key tool plus
Select an unused key position

 

 

vvdi-key-tool-plus-bmw-cas3-akl-14

 

 

CAS3+ encrypt detected. Need working key or DME/DDE dump or ISN
Here we use try start method to start engine, no need working key or engine dump file
Press Yes to continue

 

vvdi-key-tool-plus-bmw-cas3-akl-15

If already made new key (already saved new EEPROM dump), press YES, else No
Select No to continue
The vvdi key tool plus pad will ask the current key is smart key or not, it is not smart key, press NO

 

 

vvdi-key-tool-plus-bmw-cas3-akl-16

 

vvdi-key-tool-plus-bmw-cas3-akl-17

 

 

Save new EEPROM dump file
Flash the new CAS EEPOM dump into car, then use the new dealer key start engine.
If CAS belong to ISTAP4 version, don’t write new dump back to CAS.
If the car can switch ignition on EVEN it can’t start engine, don’t write new dump back to CAS.
Enter try start procedure click Yes, write eeprom dump click NO

 

vvdi-key-tool-plus-bmw-cas3-akl-18

Use the current key to start the engine, if start success press YES, else NO.
If can not start engine, take out the key and insert to programmer before press NO.

 

 

vvdi-key-tool-plus-bmw-cas3-akl-19

 

 

If engine not running, take out the key and insert to the pad, repeat this procedure until engine runs.

You will have 64 attempts.

After repeat this for over 10 times, the engine runs.

 

vvdi-key-tool-plus-bmw-cas3-akl-20

 

vvdi-key-tool-plus-bmw-cas3-akl-21

 

 

Program a new key success.

www.vvdishop.com

http://blog.vvdishop.com/vvdi-key-tool-plus-program-bmw-cas3-istap-all-keys-lost

VVDI Key Tool Plus Read & Write Benz SL500 04 Key by NEC Adapter

Xhorse VVDI Key Tool Plus Pad new test report: successfully added a new key to a  Mercedes Benz SL500 year 2004. R ead & write 2004 NEC key no issue by using NEC adapter.

 

Procedure:

One customer has a broken Mercedes Benz key, which doesn’t work. I took its NEC chip, and solder it to the NEC adapter.

 

vvdi-key-tool-plus-benz-sl500-2004-key-1

 

vvdi-key-tool-plus-benz-sl500-2004-key-2

 

 

Plug it to the VVDI Key Tool Plus to write key

 

vvdi-key-tool-plus-benz-sl500-2004-key-3

 

 

Immo programming >> Benz >> Select from system >> Read write key >> NEC adapter read and write keys >> Begin >> v05, v07, v09 smart key >> NEC identify key information

 

vvdi-key-tool-plus-benz-sl500-2004-key-4

 

vvdi-key-tool-plus-benz-sl500-2004-key-5

 

vvdi-key-tool-plus-benz-sl500-2004-key-6

 

vvdi-key-tool-plus-benz-sl500-2004-key-7

 

 

Alright, VVDI Key Tool Plus succeeds to write a new NEC key.

 

vvdi-key-tool-plus-benz-sl500-2004-key-8

 

 

https://www.vvdishop.com/

VVDI Key Tool Plus Pad change Benz FBS3 smart key frequency

How to use Xhorse VVDI Key Tool Plus Pad to change a Mercedes Benz FBS3 Smart Key frequency? Today we’ll gonna make a quick demonstration to show you.

 

Procedure

 

Step 1. Detect Frequency

Go to “Frequency Detection” in “Remote Copy” function, hold the Benz smart key close to VVDI Key Tool Plus Pad slot, press Lock button to detect its frequency. It is a FSK 433.97 MHz smart key.

 

vvdi-key-tool-plus-change-benz-key-frequency-1

 

 

Step 2. Change Frequency

Lock the smart key again, hold and press Lock button and Trunk button meanwhile until the indicator lights constantly red.

 

vvdi-key-tool-plus-change-benz-key-frequency-2

 

vvdi-key-tool-plus-change-benz-key-frequency-3

 

 

Press Unlock button on smart key, the indicator turns to flashing red. Wait for a second,  the indicator light will go, which means the frequency has been changed.

 

vvdi-key-tool-plus-change-benz-key-frequency-4

 

vvdi-key-tool-plus-change-benz-key-frequency-5

 

 

Step 3. Check Frequency.

Press Lock button to detect its frequency again, alright, it is a FSK 315.03 MHz smart key now. The frequency has successfully been changed.

 

vvdi-key-tool-plus-change-benz-key-frequency-6

 

 

VVDI Key Tool Plus also supports to copy and clone transponder, identify transponder, re-programming transponder and generate a new remote key. This is a tutorial of using it to change a Mercedes Benz smart key frequency.

 

Any questions welcome to contact us.

https://www.vvdishop.com/

Solved! VVDI MB Cannot Find W639 Erase Password

Problem:

It tells “Can not find erase password!” when I am using Xhorse VVDI MB Tool to start and load W639 EIS data. What is the problem? Please help me!

 

vvdi-mb-w639-cannot-read-pass-1

 

vvdi-mb-w639-cannot-read-pass-2

 

 

Solution:

1).

By W639 EIS ESL test cable

Hooking up MB power adapter and W639 EIS ESL test cable 

vvdi-mb-w639-eis-test-cable-1

 

vvdi-mb-w639-eis-test-cable-2

 

Connect VVDI MB with mb power adapter, W639 EIS, EIS test cable and IR reader as picture shown below:

 

vvdi-mb-w639-eis-test-cable-3

 

 

 

vvdi-mb-w639-eis-test-cable-4

 

 

Run VVDI MB software, start data acquisition

 

vvdi-mb-w639-eis-test-cable-5

 

 

 

vvdi-mb-w639-eis-test-cable-6

 

vvdi-mb-w639-eis-test-cable-7

 

 

Save EIS data and upload to calculate password

 

vvdi-mb-w639-eis-test-cable-8

 

 

The password calculation procedure takes 9 minutes around.

 

 

 

2).

By using combination tool, i.e Extreme MB tool 

Step 1. Start up Extreme MB tool software, click “Sonder Hash Online Calculator”.

 

vvdi-mb-w639-eis-test-cable-9

 

 

Step 2. Copy special key “12B281A5893FFE9E” on VVDI MB Tool and paste it to “Sonder Hash”, click “Calculate”.

 

vvdi-mb-w639-eis-test-cable-10

 

vvdi-mb-w639-eis-test-cable-11

 

 

Step 3. Copy dealer password generated, paste it to VVDI MB BGA Tool “Erase Pass”, select “Allow user” option meanwhile.

 

vvdi-mb-w639-eis-test-cable-12

 

vvdi-mb-w639-eis-test-cable-13

 

 

Click “Save EIS data”, select the original EIS file to replace.

Save >> Yes >> OK >> Save

 

vvdi-mb-w639-eis-test-cable-14

 

vvdi-mb-w639-eis-test-cable-15

 

vvdi-mb-w639-eis-test-cable-16

 

vvdi-mb-w639-eis-test-cable-17

 

 

Step 4. Completed.

Select IR mode in EIS function, now the EIS can be renewed.

 

vvdi-mb-w639-eis-test-cable-18

 

 

Problem was solved!

 

 

 

3).

By backup MB programmers, CGDI MB, Autel IM608 etc

For example: calculating W639 password by CGDI MB and AC adapter fast cable, reading pass in less than 9 minutes

 

cgdi-mb-w639-read-pass-1

 

cgdi-mb-w639-read-pass-2

 

cgdi-mb-w639-read-pass-3

 

cgdi-mb-w639-read-pass-4

 

cgdi-mb-w639-read-pass-5

 

www.vvdishop.com

http://blog.vvdishop.com/vvdi-mb-tool-can-not-find-w639-erase-password/

VVDI Mini Key Tool Rewrite Super chip XT27A66

How to rewrite VVDI super chip XT27A66 multiple times with Xhorse VVDI Mini Key Tool? Here we go to make a quick demonstration for reference.

 

Start up Xhorse app, connect it with Mini Key Tool, put xhorse super chip into the coil:

Transponder clone >> Read transponder

 

rewrite-super-chip-vvdi-mini-key-tool-1

 

rewrite-super-chip-vvdi-mini-key-tool-2

 

rewrite-super-chip-vvdi-mini-key-tool-3

 

 

This is original information from XT27A66 chip, let’s go back to main page to rewrite it:

 

Generate transponder >> ID60~ID70(40bits) >> 65-Suzuki/Subaru >> Generate

 

Transponder generate success, press “Complete”.

 

rewrite-super-chip-vvdi-mini-key-tool-4

 

rewrite-super-chip-vvdi-mini-key-tool-5

 

rewrite-super-chip-vvdi-mini-key-tool-6

 

rewrite-super-chip-vvdi-mini-key-tool-7

 

rewrite-super-chip-vvdi-mini-key-tool-8

 

rewrite-super-chip-vvdi-mini-key-tool-9

 

 

Go back to read the XT27A66 chip again: Transponder clone >> Read transponder

 

As you seen, the information has been changed.

 

rewrite-super-chip-vvdi-mini-key-tool-10

 

Okay, go back to select another car model to have a try:

 

Generate transponder >> ID46(PCF7936) >> ID46-Indian cars >> Indian Suzuki >> Generate

 

Transponder generate success, press “Complete”.

 

Now let’s read the vvdi super chip again: Transponder clone >> Read transponder

 

rewrite-super-chip-vvdi-mini-key-tool-11

 

rewrite-super-chip-vvdi-mini-key-tool-12

 

rewrite-super-chip-vvdi-mini-key-tool-13

 

rewrite-super-chip-vvdi-mini-key-tool-14

 

 

Alright, the information has been changed again. Rewriting XT27A66 super chip is successful!

 

Xhorse Super Transponder XT27A66 can be reused for several times. Working with VVDI Mini KeyTool is quite easy and efficient.

https://www.vvdishop.com/

http://blog.vvdishop.com/rewrite-xt27a66-super-chip-via-vvdi-mini-key-tool/

Xhorse Key Blade vs. Other Common Key Blade

Xhorse Tech released a full range of valuable universal key blanks to better serve locksmith friends in 2020.  These metal key blanks are used for automotive and motorcycle applications.

 

xhorse-key-blade-1

 

 

 

  • Specially designed to exceed locksmiths’ requirements and expectations.
  • Produced in a nickel-plated finish and are packaged in polybags of 10 units, and 5 polybags of a box. [50pcs/box]
  • Applied to cut keys covering over 2,000 models.

 

 

Xhorse Key Blanks Top Advantages:

  • Excellent utility
  • High corrosion resistance
  • Nickel plating Shiny appearance
  • High corrosion resistance
  • Strong abrasion protection
  • Strong wear protection

 

Xhorse key blanks vs. common key blanks

 

xhorse-key-blade-2

 

xhorse-key-blade-3

 

 

XHORSE UNIVERSAL KEY BLANK MODEL LIST
xhorse-key-blade-4
xhorse-key-blade-5
xhorse-key-blade-6
xhorse-key-blade-7
xhorse-key-blade-8
xhorse-key-blade-9
xhorse-key-blade-10
xhorse-key-blade-11
Feel free to contact www.vvdishop.com customer service for price and detail information.

VVDI2 Changed Seat Ibiza EDC17U01 Immo Data in EEPROM

Here vvdishop.comm presents how work Xhorse VVDI2 VAG for change immo data in eeprom from Seat Ibiza EDC17U01 .

 

Run VVDI2 Quick Start->Seat->Special Function->MED17/EDC17 dump tool

vvdi2-change-edc17-immo-data-1

 

vvdi2-change-edc17-immo-data-2

Load EEPROM File,  upload original Ibiza EDC17U01 eeprom

vvdi2-change-edc17-immo-data-3

 

vvdi2-change-edc17-immo-data-4

Load Flash file, upload original EDC17U01 flash file

vvdi2-change-edc17-immo-data-5

Then press Decode

vvdi2-change-edc17-immo-data-6

Decode ECU information, incl. ECU Type, CIN, CS, PIN MAC, Immo type

vvdi2-change-edc17-immo-data-7

Save as TXT

Upload EEPROM file and Flash File you want to change respectively

vvdi2-change-edc17-immo-data-8

 

vvdi2-change-edc17-immo-data-9

Then Decode
missing IMMO ID, Load from TXT saved previously

vvdi2-change-edc17-immo-data-10

 

vvdi2-change-edc17-immo-data-11

Decode success. Save new EEPROM dump.

vvdi2-change-edc17-immo-data-12

 

vvdi2-change-edc17-immo-data-13

Open txt file to check ECU information

vvdi2-change-edc17-immo-data-14

 

change EDC17 immo data in eeprom success.

 

www.vvdishop.com

https://www.vvdishop.com/service/vvdi2-change-vw-edc17-immo-data-in-eeprom.html

How to Replace and Program Xhorse VVDI Mini ELV Emulator?

How-to: replace/program Mercedes C300 ELV by using VVDI mb and elv emulator.
Model: Mercedes Benz C300 W207 year 2006
vvdi-mb-program-c300-2006-elv-1
Device required:
A working key
12V adapter
Procedure:
Make Connection
vvdi-mb-program-c300-2006-elv-2
connect VVDI MB with EIS, Benz test platform and 12V adapter
vvdi-mb-program-c300-2006-elv-3
power on the test platform
Run VVDI MB software, Go to EIS Tools> Read EIS Data
vvdi-mb-program-c300-2006-elv-4
Reading data success. EIS is normal.
Go to Password Calculation-> select Chassis W172, 204, 207 with ELV -> Data Acquisition
vvdi-mb-program-c300-2006-elv-5
Insert working key to EIS before press OK
vvdi-mb-program-c300-2006-elv-6
Take working key out of the EIS
vvdi-mb-program-c300-2006-elv-7
Insert working key into EIS again before press OK
Take out working key
Then insert working key into vvdi mb IR reader
vvdi-mb-program-c300-2006-elv-8
vvdi-mb-program-c300-2006-elv-9
Data acquisition in process
Insert working key to EIS
Reading data success. Save data.
vvdi-mb-program-c300-2006-elv-10
vvdi-mb-program-c300-2006-elv-11
Data acquisition finished. Upload the saved data with “Upload Data” for password
vvdi-mb-program-c300-2006-elv-12
Upload success.
Tick Auto reflash and press Query result
vvdi-mb-program-c300-2006-elv-13
Calculate password online success. Save pass.
vvdi-mb-program-c300-2006-elv-14
Copy the password
Go to EIS Tools, paste password to corresponding area
vvdi-mb-program-c300-2006-elv-15
Save EIS data
vvdi-mb-program-c300-2006-elv-16
Save as HC05 format
vvdi-mb-program-c300-2006-elv-17
Press Get to search erase password
vvdi-mb-program-c300-2006-elv-18
Find erase password success
vvdi-mb-program-c300-2006-elv-19
Save and replace previous EIS data
Save and replace HC05 format file
vvdi-mb-program-c300-2006-elv-20
vvdi-mb-program-c300-2006-elv-21

 

vvdi-mb-program-c300-2006-elv-22
Go to ESL Tools-> Read ESL data -> Load ESL data
vvdi-mb-program-c300-2006-elv-23
Upload ESL data read previously
vvdi-mb-program-c300-2006-elv-24
Tick Auto clear TP and personalized
Press Write
vvdi-mb-program-c300-2006-elv-25
Confirm use ESL emulator for the ESL
vvdi-mb-program-c300-2006-elv-26
Writing data success.
Read EIS data again
vvdi-mb-program-c300-2006-elv-27
Test the ELV emulator on car
vvdi-mb-program-c300-2006-elv-28
vvdi-mb-program-c300-2006-elv-29
Done.

How to Replace BMW FEM Module with VVDI2?

Question: 
I have BMW FEM with water ingress.
Old Fem is damaged
How can I replace with used one?
Possible to replace it using vvdi2?
Solution:
Yes, it is possible to replace with a used one.
Unlock fem old and save backup file fem. unlock fem new and write file backup (write vin/isn ecu)
The ISN from ECU, you need isn save from old and write to new. Try the new vvdi prog bosch ecu cableto not have to opening ECU .
eeprom 95128 or 95256 need read and write.
Xhorse VVDI2  it okey. You can replace fem to other fem (both new and used FEM. This is confirmed by Xhorse engineer). Its 15 min.
vvdi2-change-used-bmw-fem-1

 

vvdi2-change-new-bmw-fem-2
if not connect you must have new fem ordered or used fem write new key and DME ISN and 8HP reset ISN ! change VIN IN FEM !
with vvdi bmw, autohex or BMW Explorer.

How to Update VVDI Key Tool Max and Mini OBD?

Question: I received the xhorse vvdi mini OBD tool, impossible to update?
Answer:
Yes. Update is done via key tool max upgrade.
You need Xhorse Keytool Upgrade Kit.
Install it on your PC, make sure Internet-connected online.
>>connect white USB cable provided on Mini OBD Dongle to PC USB. Just follow on pop-up screen instruction. This stage do not switch ON your VVDI Key Tool Max.
The upgrade kit will Auto Detect your device and update to the next version.
IMPORTANT update firmware version in sequence do not jump to the latest Version number.
Do it step by step until you get the latest version.
Finished>>>Switch on your Key Tool Max and pair (Bluetooth) with Mini OBD Tool, and you get screen pop-up menu on Key Tool Max.
Note:
There are 3 ways for KEY TOOL MAX connect to MINI OBD TOOL: 1) USB TYPE-C Cable  2) WIFI  3) Bluetooth