How to Calibrate Condor XC-Mini Plus Clamp and Cutting?

How to calibrate Xhorse Condor XC-Mini Plus automatic key cutting machine? This post is going to show the procedure in details.

 

Power on Condor XC-Mini Plus, press “Self Test” on main menu.

 

calibrate-condor-xc-mini-plus-1

 

 

Step 1. Height Level Adjustment

To start this process, make sure the cutter is lower than the probe. Press “Height Level Adjustment”.

 

Reminder:

  1. Install and tighten Clamp M1. there is no need to put any key on the clamp.
  2. Cutter lever needs to be adjusted every time after changing the probe and the cutter.
  3. Then length of the A position should be less than 2cm.
  4. After the fixed installation of the probe and the cutter, then end tip of the probe needs to be lower than the cutter’s(see ex.I).
  5. Must use the original probe.

 

calibrate-condor-xc-mini-plus-2

 

calibrate-condor-xc-mini-plus-3

 

 

Press “Continue”, the cutter on XC-Mini Plus starts touching the clamp, you should lower the probe to be same height level. Press “Continue” again.

 

It will ask what type of cutter you’re using on Condor Mini Plus screen, today we are taking 2.5mm as example, so select “2.5mm”, then press “Confirm”.

 

calibrate-condor-xc-mini-plus-4

 

calibrate-condor-xc-mini-plus-5

 

calibrate-condor-xc-mini-plus-6

 

 

Step 2. Clamp Calibration

Press “Clamp Calibration”, select the clamp type you’re using: M1/M2. Today we are using an M1 clamp, so select M1.

 

calibrate-condor-xc-mini-plus-7

 

calibrate-condor-xc-mini-plus-8

 

 

Reminder:

  1. before using this function, please confirm that “Height Level Adjustment of Cutter” is completed.
  2. Put a Hon66 blank key in the middle position of the clamp, then tighten the clamp.

 

Press “Continue”, XC-Mini Plus starts calibrating…

 

Calibrate OK, press “Confirm” to return.

 

calibrate-condor-xc-mini-plus-9

 

calibrate-condor-xc-mini-plus-10

 

calibrate-condor-xc-mini-plus-11

 

 

Step 3. Cutting Calibration

Return back to upper level, press “Cutting Calibration”.

Reminder:

  1. This function can cut a blank key, mainly for calibration.
  2. Before accessing this function, please confirm that the “Height Level Adjustment of Cutter” is completed.
  3. Install and fasten clamp M1.
  4. Clamp a blank key Hon66 on the Clamp M1, then line the key up with the first location jaw, and fasten.

 

Press “Continue”, Xhorse condor starts cutting…

 

Completed!

 

calibrate-condor-xc-mini-plus-12

 

calibrate-condor-xc-mini-plus-13

 

calibrate-condor-xc-mini-plus-14

 

 

You are now set to use the Condor XC-Mini Plus key cutting machine.

https://www.vvdishop.com/service/xhorse-condor-xc-mini-plus-calibration.html

Condor XC-Mini Plus Cut a Key for Fiat Ducato 2006-

What is going on, guys? Today I’m gonna use Xhorse Condor XC-Mini Plus to copy and cut a new key for Fiat Ducato year 2006 up. Here are 2 Fiat keys, the right one is original key, and the left one is new key to be cut.

condor-mini-plus-cut-fiat-ducato-key-1
 

Follow me, go to the Condor XC-Mini Plus tablet.

 

Key duplication >> Fiat >> Ducato >> After 2006 >> Confirm

 

condor-mini-plus-cut-fiat-ducato-key-2

 

condor-mini-plus-cut-fiat-ducato-key-3

 

condor-mini-plus-cut-fiat-ducato-key-4

 

condor-mini-plus-cut-fiat-ducato-key-5

Put the original key flat on M2 clamp, fasten it. Then put down the cover.

 

Press “Key Decode” to start.

 

XC-Mini machine starts decoding…

 

condor-mini-plus-cut-fiat-ducato-key-6

 

condor-mini-plus-cut-fiat-ducato-key-7

 

condor-mini-plus-cut-fiat-ducato-key-8

 

 

Decode completed.

 

Put up machine cover to take out the key, change to the new key fixing on.

 

Press “Cut Key” on tablet.

 

XC-Mini machine starts cutting…

 

condor-mini-plus-cut-fiat-ducato-key-9

 

condor-mini-plus-cut-fiat-ducato-key-10

 

condor-mini-plus-cut-fiat-ducato-key-11

 

 

Cutting key one side complete.

 

Sweep the burrs, take out and turn the key to other side, then fix it on again.

 

Repeat the operation as previous. Press “Cut Key” to continue.

 

Condor Mini Plus machine starts cutting again…

 

Cutting key complete!

 

Compare to the original key, they are same. Let me try it on the lock, alright it can work well.

condor-mini-plus-cut-fiat-ducato-key-12

This is how to copy and cut a Fiat Ducato key via Condor XC-Mini Plus Key Cutting Machine. It is so smart to automatically finish the job in 5 minutes.

http://blog.vvdishop.com/xhorse-condor-xc-mini-plus-cut-fiat-ducato-2006-key/

How to work Condor XC-Mini and Mini Plus on Xhorse App?

Good News ! Now Xhorse CONDOR XC MINI & Condor XC-MINI PLUS can work on Xhorse App. Using same Dolphin database.
1. Support the Condor machine with the first 4 digits code of the serial number:
KM03” and “KM05
2. Users need to Upgrade the firmware and Xhorse App to latest version.
KM03 firmware version: 6.1.3
(App version 1.9.4)
KM05 firmware version 3.1.3
(App version 1.9.4)
condor-xc-mini-xhorse-app-1
condor-xc-mini-xhorse-app-2
How to make Condor Mini Plus work on Xhorse App?
Turn on Bluetooth connection on Condor
Run Xhorse App
Select device and auto search device
condor-xc-mini-xhorse-app-3
condor-xc-mini-xhorse-app-4

 

condor-xc-mini-xhorse-app-5
Bluetooth message received
condor-xc-mini-xhorse-app-6
Now you can use Condor mini on Xhorse app to cut keys
condor-xc-mini-xhorse-app-7

 

condor-xc-mini-xhorse-app-8

 

condor-xc-mini-xhorse-app-9

Condor XC-Mini Plus and Condor Dolphin XP005 Table Comparison

2019 new Xhorse key cutting machines Condor XC-Mini II vs. Dolphin XP005.
Key Cutting Machines Condor XC-Mini Plus Condor Dolphin XP-005
Image
condor-mini-plus-1
condor-dolphin-xp005
Screen
condor-mini-plus-screen
LED Display 1024×600 Adjustable Touch-Screen
condor-dolphin-screen
Small screen showing battery and Bluetooth status
Spindle Electric spindle brushless 300, built-in angular contact bearing Mechanical shaft +60W DC motor (with a foreign model)” “Electric spindle brushless 300W, built-in angular contact bearing
Transmission mechanism Ball screw T-shaped screw + anti-backlash nut
Guide Cross-track Roller guide
Shell Plastic outer casing body is formed by body alloying die casting Base aluminum alloy die-casting, the upper body is made of plastic shell and the body is made of integrated aluminum alloy die-casting.
Operating system Stand-alone/ mobile phone APP mobile phone APP only
Battery Without built-in battery.

With built-in battery. 3 hours to fully charge. Full battery cut up to 30 keys
Built-in Database Yes No
All Keys Lost Yes, offline operation Yes, must enable network connection.*
Accuracy more accurate Less accurate
Offline operation Standby No
Service life/ mechanical endurance Longer Shorter
Weight Net Weight: 18kg

Gross Weight: 22.9kg
Net Weight: 15kg
Gross Weight: 18kg
Motor Rotation Speed 9000rpm 10000-13000RPM
Cutting power: 200W 100W
Protection cover Comprehensive protection Simple protective cover. . Smaller, better wear goggles
VVD binding Yes Yes
Clamp M1 clamp (included)

M2 clamp (included)
M3 clamp (optional)
M4 clamp (optional)
M1 clamp (included)

M2 clamp (included)
M3 clamp (optional)
M4 clamp (optional)
Warranty 3 Years 1 Year
Update Update online via Xhorse Update Kit Update online via Xhorse Update Kit
Price US$3,099 Free Shipping US$1,950 Free Shipping
*Once enable network connection in Condor Dolphin Xp005, the all keys lost database is the same as Condor Mini Plus offline mode.
In Conclusion:
Condor XC-Mini Plus is powerful and faster than Condor Dolphin. With built-in database can do all keys lost offline.  More accurate than dolphin.
Condor Dolphin is based on mobile app, it is smaller, lighter and much cheaper.
It depends your budget. Condor Mini Plus is a good buy in a long run.

How to use Condor Mini to cut YA226 House Key?

How-to: use Xhorse Condor xc-mini /xc-mini plus key cuttingn machine and M4 Clamp for house key trace and cut YA226 by universal type menu.
condor-mini-m4-clamp-ya226-house-key-1
condor-mini-m4-clamp-ya226-house-key-2
New Xhorse M4 Clamp is used for housekey. It comes with stopper and 2 size of lifting wires
How to trace and cut Yale YA226 key?
condor-mini-m4-clamp-ya226-house-key-3
condor-mini-m4-clamp-ya226-house-key-4
Change to M4 clamp
condor-mini-m4-clamp-ya226-house-key-5
condor-mini-m4-clamp-ya226-house-key-6
In Condor Mini, choose Key Duplicating->Universal Type 
condor-mini-m4-clamp-ya226-house-key-7
Choose key type. In Yale YA226: Standard single sided
condor-mini-m4-clamp-ya226-house-key-8
condor-mini-m4-clamp-ya226-house-key-9
1.Keep the key/probe/fixture clean.
2.Recommended to use M1, M4 clamp and 1.5mm drill(cutter). Here we use M4 clamp.
Change menu M1 to M4
condor-mini-m4-clamp-ya226-house-key-10
Use tracer: 1mm and cutter 1.5mm
condor-mini-m4-clamp-ya226-house-key-11
condor-mini-m4-clamp-ya226-house-key-12
 Put stopper on Yellow arrow line and lock key
condor-mini-m4-clamp-ya226-house-key-13
Tracing bitting process…
condor-mini-m4-clamp-ya226-house-key-14
Show bitting
Show tracing bitting again
condor-mini-m4-clamp-ya226-house-key-15
Put new blank key to M4 clamp 
condor-mini-m4-clamp-ya226-house-key-16
Press Cut and close shield
condor-mini-m4-clamp-ya226-house-key-17
Cuttin in progress
condor-mini-m4-clamp-ya226-house-key-18
Cutting YA226 house key success
condor-mini-m4-clamp-ya226-house-key-19
Test the new key, it works perfectly.