Dolphin XP005L Archives | Page 2 of 2 | Xhorse VVDI Tools Software and Hardware

6. July 2023.

How to Cut Ducati multistrada 1200 Key with Xhorse Dolphin II?

How to: cut, copy and cloning Ducati multistrada 1200 year 2014 4D motorcycle key with xhorse combo.

Device used:

Xhorse key reader

Xhorse Dolphin XP005L Dolphin II

VVDI Key Tool plus (or key tool max/key tool max pro)

How this Xhorse combo works, making a Ducati key?

Decode key bitting with key reader

Cut key with dolphin 2

Image attached:

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 1

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 2

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 3

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 4

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 5

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 6

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 7

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 8

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 9

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 10

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 11

After cut key, start cloning.

Go to Transponder cloning function. Identify key chip type: ID40

Then clone transponder key with key tool plus.

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 14

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 15

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 16

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 17

Xhorse Dolphin II Cut Ducati Multistrada 1200 Motor Key 18

www.vvdishop.com

24. May 2023.

How to Solve Xhorse Dolphin XP005L Peugeot HU83 Error Code 2?

Problem:

I had a problem cutting Peugeot 207 HU83 key blade with new xhorse dolphin xp005l key cutting machine. Giving Error code 2 probes not detected.

Xhorse Dolphin XP005L PSA HU83 Error Code 2 1

Xhorse Dolphin XP005L PSA HU83 Error Code 2 2

Xhorse Dolphin XP005L PSA HU83 Error Code 2 3

Solution:

The clip key is in the wrong position.

Pay attention to the position of the clip key, not in the bottom groove.
If the key clip is in working position you will fail to cut key (usually get error code 2)

www.vvdishop.com

6. April 2023.

How to Cut Chrysler CY24 key by Xhorse Dolphin II?

If you have a problem cutting Chrysler CY24 key with Xhorse Dolphin XP005L key cutting machine, here’s tip.

Cut Chrysler CY24 Key with Xhorse Dolphin XP005L

Put the key in as far as you can and the machine will cut it. We do it on mine all the time.

never had to grind anything.
cy24 is probably the most common key to cut, never once had an issue with it not being far enough.
You have to ignore the instructions on the Dolphin II for the M5 clamp to cut it. You can’t line it up to the line it says.

Cut dozens of them no issues with dolphin 2 and m5 clamp. I’ve cut at least 20 of these no problem.You can also use the universal setting, tip align as far in as the key will sit on side A of the clamp.

Never has an issue with dolphin I with M1 clamp position neither.

4. April 2023.

Xhorse Dolphin XP005L Error Code 6 Working Solution

If your Xhorse dolphin XP005L (Dolphin II) key cutting machine had error code 6.

Example 1: When doing height calibration, dolphin ii got error 6.

Example 2: Error 6 when trying to cut a toy 40 Blade the machine did decode the original but would not cut the blank. Using a 1.5 mm cutter and after full calibration it still would not cut.

If it is a new machine, follow the instructions here to check conductivity and milling probe.

How to Detect Xhorse Dolphin XP005 Probe and Cutter Conductivity?

If it is an old machine, do a conductivity test and send test video to xhorse engineer for analysis.