Xhorse Key Tool Plus Read 2010 Citroen Berlingo Pin Code and Add Key

This is an operation procedure about how to add a new remote key for 2010 Citroen Berlingo with Xhorse VVDI Key Tool Plus Pad Key Programmer.

 

Read IMMO Password

Plug Key Tool Plus connector into OBD2 port, press

Immo programming >> Europe >> Citroen/DS >> Password reading >> Type 1 CAN(all key lost or adding) >> Start programming >> IMMO password reading >> OK

 

Follow the prompts to operate:

Turn on the double flash indicator, press “OK”.

 

Open then close the driver door once, press “OK”.

 

Password was read out, press “OK”.

 

vvdi-key-tool-plus-2010-citroen-berlingo-1

 

vvdi-key-tool-plus-2010-citroen-berlingo-2

 

vvdi-key-tool-plus-2010-citroen-berlingo-3

 

vvdi-key-tool-plus-2010-citroen-berlingo-4

 

vvdi-key-tool-plus-2010-citroen-berlingo-5

 

 

Program Key

Go back to press

Select by model >> Berlingo >> Type 3 (CAN) >> Start programming >> Key programming

 

Follow the prompts to operate:

Switch ignition to ON position, press “OK”.

 

Enter the password. Press “OK”.

 

Press “Yes” to continue to match.

 

vvdi-key-tool-plus-2010-citroen-berlingo-6

 

vvdi-key-tool-plus-2010-citroen-berlingo-7

 

vvdi-key-tool-plus-2010-citroen-berlingo-8

 

vvdi-key-tool-plus-2010-citroen-berlingo-9

 

vvdi-key-tool-plus-2010-citroen-berlingo-10

 

 

Switch ignition off, press “OK”.

 

Insert the key to be programmed, switch ignition on within 15s!

 

Key match successfully!

Press “No” to complete.

 

Steps to reprogram the remote:

  1. Turn off the ignition switch & remove the key.
  2. Insert a key, turn the ignition switch to ON.
  3. In 20 seconds, press any button of remote for 10 seconds then release.
  4. Turn off the ignition switch and remove the key.
  5. If need to program multiple remotes, please repeat step 2-4.

Press “OK”.

 

Let’s go to test the key, its remote works fine!

Key programming has done!

 

vvdi-key-tool-plus-2010-citroen-berlingo-11

 

vvdi-key-tool-plus-2010-citroen-berlingo-12

 

vvdi-key-tool-plus-2010-citroen-berlingo-13

 

vvdi-key-tool-plus-2010-citroen-berlingo-14

 

 

Using VVDI Key Tool Plus to add a remote key for 2010 Citroen Berlingo successfully.

https://www.vvdishop.com/

Xhorse Key Tool Plus Adds Hyundai Venue 2020 ID4A Key

Xhorse VVDI Key Tool Plus Pad can program Hyundai Venue 2020 ID4A key successfully.

As below is the operation step by step.

 

Prepare a original key & a new smart key.

Plug Key Tool Plus connector into OBD2 port, let’s start:

 

xhorse-hyundai-2020-venue-key-1

 

 

Program Key

Immo programming >> Asia >> Hyundai >> Select by type >> Key programming >> Type 9 >> Start programming >> Key programming

 

xhorse-hyundai-2020-venue-key-2

 

xhorse-hyundai-2020-venue-key-3

 

xhorse-hyundai-2020-venue-key-4

 

xhorse-hyundai-2020-venue-key-5

 

 

Turn the ignition switch to ON, press “OK”.

 

Enter 6-digit password, press “OK”.

 

Insert the original key and switch ignition on ON. Press “OK”.

 

Matched successfully.

Press “OK” to match next one.

 

Insert the new smart key and switch ignition on ON. Press “OK”.

 

Matched successfully.

Press “Cancel” to finish.

 

Program completed! Press “OK”.

 

xhorse-hyundai-2020-venue-key-6

 

xhorse-hyundai-2020-venue-key-7

 

xhorse-hyundai-2020-venue-key-8

 

xhorse-hyundai-2020-venue-key-9

 

 

Program Remote

Go back to “Select by type” page, press

Remote system >> 16PIN >> Type 2 >> Start programming >> Remote key adaptation

 

xhorse-hyundai-2020-venue-key-10

 

xhorse-hyundai-2020-venue-key-11

 

xhorse-hyundai-2020-venue-key-12

 

 

Choose OBD2 interface, and turn on the ignition switch to ON. Press “OK”.

 

Switch ignition off, remove the key, press “OK”.

 

Match remote: press UNLOCK or LOCK button for more than 1 second.

 

Match 1 remotes successfully, press “Cancel” to finish.

 

Remote match completely. Press “OK”.

 

xhorse-hyundai-2020-venue-key-13

 

xhorse-hyundai-2020-venue-key-14

 

xhorse-hyundai-2020-venue-key-15

 

xhorse-hyundai-2020-venue-key-16

 

xhorse-hyundai-2020-venue-key-17

 

 

Here we go to test the key now, it can work well.

Key programming has done!

 

This is a demonstration of Hyundai Venue 2020 ID4A key programming via Xhorse Key Tool Plus.

https://www.vvdishop.com/