VVDI Key Tool Max Pro Program 2023 Chevrolet Camaro Smart Key

This is 2023 Chevrolet Camaro, today I’m gonna use Xhorse VVDI Key Tool Max PRO to program a new smart key for this car. The procedure is simple in 2 steps. Here I have the original key and new key, so let’s get start.

 

If you’ve lost your Camaro smart key or need to set up a new one, this guide is for you. We’ll show you how to use the VVDI Key Tools Max to add a smart key for your Chevy Camaro ZL1 or any other model. It does all keys lost as well. The model is still old platform. This method is a cost-effective alternative to visiting a dealership, and with the right tools, you can do it yourself. The VVDI Key Tool Max Pro is a powerful device that can be used for a wide range of key programming tasks, including Chevrolet smart key programming.

 

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 1

 

Procedure:

Step1. Read Password

Go to IMMO Programming- Chevrolet- Read Pin Code- Type 4 (BCM)

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 2

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 3
It is smart key, press Start button once.
Confirm VIN

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 4

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 5

 

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 6

 

Key Tool Max PRO shows the password: 7539

Read password successfully.

 

Step2. Add Key

Immo programming >> Chevrolet >> Read PIN code >> Type 4(BCM) >> United States Area >> Camaro >> 2020-2021 >> Smart keys programming >> Start execution >> Add a key

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 7

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 8

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 9

Take keys out of car, place the smart key to be programmed into key slot.

Please enter 4-digit authorizatio code: 7539

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 10

 

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 11

Configuring system,
Wait about 10 minutes

 

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 12
Detects keys 2

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 13
Press Start button
Ready for key 3

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 14
Configuring system
Add key with vvdi key tool max pro successfully.

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 15
Turn off the ignition switch.
Click and hold start button for 9 seconds.

 

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 16

Release the button, then click OK to continue.
Click and hold start button to turn on the ignition.
Turn off the ignition switch.

 

Step on the brake and press the Start to start engine.

Program key is completed.

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 17

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key 18

Test the new key.

www.vvdishop.com

VVDI Key Tool Max Pro Peugeot Marelli ID48 Key Programming Procedure

Question:

Will Xhorse VVDI Key Tool Max Pro Add a Key to my Peugeot Boxer 2.2 2009 with magneti marelli immo?

 

Yes, key tool max pro will add a spare key to Peugeot Citroen ID48 with Marelli IMMO system.

Go to IMMO system (Marelli 70F3238 + 95320 ID48) function.

Supports read eeprom, write eeprom, make dealer key, key programming, adapt remote key and renew remote.

 

Xhorse Key Tool Max Pro Add Peugeot ID48 key Marelli IMMO 1

 

If need to add a new key, follow steps below to finish key programming.

Xhorse Key Tool Max Pro Add Peugeot ID48 key Marelli IMMO 2

FYI:

If your car has id46 transponder then no problem for you, can use precoded transponder and program in car via diagnostic device but if is immo3 with id48 than you need special precoded id48 chip from vin from dealer or need make transponder with key maker from dump and need rewrite new dump which will be produce during transponder programing. in this mean the transponder is ready to start car.

www.vvdishop.com

VVDI Key Tool Max Pro Device Self Test Procedure

If your Xhorse VVDI Key Tool Max pro fails to start communication with vehicle and asks to check if the OBD wiring is normal, follow guide below to do a device self test.

 

Xhorse VVDI Key Tool Max Pro OBD Self Test 1

 

VVDI Key Tool Max Pro Self Test

In main menu select IMMO Programming

Xhorse VVDI Key Tool Max Pro OBD Self Test 2

Select More Functions

Xhorse VVDI Key Tool Max Pro OBD Self Test 3

Press Device Test

Xhorse VVDI Key Tool Max Pro OBD Self Test 4

Select K-line Test

Xhorse VVDI Key Tool Max Pro OBD Self Test 5

Short Connect PIN7 and PIN15 with the OBD connector.

Xhorse VVDI Key Tool Max Pro OBD Self Test 6

If Key Tool Max Pro says the test failed, there is something wrong with the device. You may need to send it back for repair.

https://www.vvdishop.com/service/vvdi-key-tool-max-pro-self-test.html

Program FIAT 500 2008-2017 Key by Xhorse VVDI Key Tool Max Pro

Today I’m gonna show how to add a new smart key for 2009 FIAT500 first version with Xhorse VVDI Key Tool Max PRO by OBD.

 

Turn ignition on.

Connect VVDI Key Tool Max PRO to car OBD port.

 

Immo programming >> FIAT >> Select by area >> European area >> 500 >> Flip-key(2008-2017) >> IMMO system(DELPHI 93C86_ID46) >> Start programming >> Type 1(93C86) >> Display immo information(PIN, Key ID)

Here we can check the password: 27665

 

Press “Make dealer key”

Please put the key or blank 46 chip in the sensing coil of the Key Tool Max PRO and keep it still, because some non-original key position will be different.

Press OK.

Generating dealer key, please wait…

Generate dealer key successfully.

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 1

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 2

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 3

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 4

 

Press “Key programming”.

All keys that can start the vehicle must be programmed, keys that are not programmed will be scrapped(cannot be programmed again).

The new key to be programmed must be a dealer key!

Press Yes to continue.

 

Please enter a 5-digit security code: 27665

Here Key Tool Max PRO will automatically enter it.

 

Switch ignition on.

Current key number: 2

Insert the wanted programming key, switch ignition on.

Programmed successfully.

Press Yes to program next one.

 

Remove the current key, then insert the key to be matched and turn on ignition!

Programmed successfully.

Press No to continue.

 

Turn the ignition off.

Switch ignition on.

Key program function ends.

Current number of keys: 2

Please make sure whether the key function is normal!

 

Test the new keys, both can start the car and remote work OK.

Done.

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 5

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 6

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 7

 

Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key 8

 

www.vvdishop.com

Xhorse Key Tool Max Pro Add Key Nissan Pathfinder 2017

2017 Pathfinder, add-key with Autel IM508. It’s not taking any of the keys in, even their original key.

No DTC codes until after a few shots, now flagging B2198.

 

Xhorse VVDI Key Tool Max Pro Adds 2017 Nissan Pathfinder Key

 

UPDATED:
My Xhorse VVDI Key Tool Key Max Pro came to the rescue.

It’s saved my ass on several Nissans that my Autel wouldn’t do.
Popped right in with it, after running the programming process on my Key tool max pro a second time. First time, the remotes took, but not the chips. Second programming run with the Key tool max pro, the chip programmed in. Not the first time my 508 failed me, either. The code went away after programming with the Xhorse tool.

 

 

www.vvdishop.com

How to Add Land Cruiser Prado 150 2013 by VVDI Key Tool Max Pro

It is a Toyota Land Cruiser Prado 150 2013 with keyless entry system. Here we will show how to add a spare key to this module using xhorse vvdi key tool max pro and XM38 smart key.

 

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 1

 

First, read the information of the chip and radio channel from the original remote control.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 2

At the top are the Xhorse keys, and below are the original ones. Xhorse keys are very nicer than their relatives.

 

 

We read the data on the chip and radio channel from the original keys, click generate remote control.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 3

Preparing/generating a new key/remote.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 4

Programming the immobilizer, selecting the brand, model and immo system.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 5

Turn on ignition switch and confirm.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 6

Select Add Key.

 

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 7

 

We see the number of keys registered in the system is 2 and the maximum number is 5.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 8

Put the original key close to the engine Start button within 30s, you should hear a beep.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 9

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 10

Put the Xhorse XM38 Toyota smart key to the ignition switch.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 11

Here we see that the number of registered keys has become 3, and the number of which can be additionally registered has decreased by one.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 12

It says that if the remote control does not work, you need to perform a synchronization procedure.

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 13

Xhorse Key Tool Max Pro Program Toyota Prado 2013 XM38 Smart Key 14

The key was added without any problems.

www.vvdishop.com

Xhorse VVDI Key Tool Max Pro Program BMW EWS3 Key via Dump

How-to: program BMW X5 E53 old version EWS3 spare key using Xhorse VVDI Key Tool Max Pro.

 

Tools used:

Xhorse vvdi prog

Xhorse EWS3 adapter

Xhorse VVDI Key Tool Max Pro

 

 

Procedure:

Step 1: Read EWS3 dump wtih vvdi prog

Remove and open EWS3 module

Connect EWS3 with vvdi prog via EWS3 solder free adapter.

If get chip crack failure error, check connection and try again.
Read EWS data and save.

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 1

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 2

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 3

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 4

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 5

 

Upload EWS3 dump to i.xhorse.com cloud database.

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 6

 

Step 2. Write Key via Dump

Go to Key Tool Max Pro Immo Data Tool->File Management->My Data

Download EWS3 dump from i.xhorse.com server

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 7

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 8

 

Now we have this file on the key tool max pro device.

Go to Immo Data Tool->Europe->BMW->EWS3->Start execution

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 9

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 10

 

Clone start need select original key position. Select original key position, select chip type as PCF7935, put blank pcf7935 chip into induction coil, then press Make dealer key.

 

VVDI Key Tool Max Pro Make BMW EWS3 Key 11

 

 

Prepare dealer key success.

VVDI Key Tool Max Pro Make BMW EWS3 Key 12

Then cut the blade and try to start engine with the new key.

www.vvdishop.com