Tag: VVDI2 VW

Here is the guide to use Xhorse VVDI2 VAG key programmer to add key for Passat 2013 with VDO NEC+24C64 dashboard by OBD.

VVDI2 adds Passat 2013 Key Guide:

Go to VVDI2 software-> select VW car brand

Select Key Learn->4th Immobilizer system-VW/Skoda/Seat->Auto detect type
VVDI2 read VIN ECU and dash type: NEC+24C64

Click on Diagnosis

Click on Read EEPROM/FLASH
Select Read eeprom, click on Next

Turn ignition to ON position (If it is smart key, turn ignition OFF then turn it ON)

Dash instrument screen is in black, it is normal

Follow VVDI2 key programmer prompts:

1.Dashboard is in black, complete following steps to activate the dash:

2.Read and save eeprom data

3.Read and save IMMO data

4.Generate a dealer key (if has working key and does not need to add a key, skip to Step 7)

5. Reset dash

6.Key learning from immo data

7. Other functions

Reading eeprom data
Dave eeprom data

Read Immobilizer data
Save immo data

Click on Generate Dealer Key

Choose car manufacture->VW

Select Prepare normal dealer key

Insert car key into vvdi2 VW

click Next
confirm YES to generate VW normal dealer key

Generate dealer key success

all preclude done

Reset dash

Reset success. Dash activated.

Select Add key

(Make sure you have backup both eeprom and immo data)

Select 2nd option to do key learning and enter key numbers to to learned
click on Next

Turn ignition to ON position (If it is smart key, turn ignition OFF then turn it ON)
Confirm if it is smart key

If the dash display 1-2, insert next key into VVDI2’s coil

Insert second key within 5 seconds, turn ignition ON for 2 seconds, dash displays 2-2

Key Learning success

Start engine with the new key.

Done!

www.vvdishop.com

VVDI2 VAG Add Key for Passat 2013 VDO NEC+24C64 Dash by OBD