VVDI2 Archives | Page 2 of 13 | Xhorse VVDI Tools Software and Hardware

17. January 2024.

Program VW Passat B7 All Keys Lost by VVDI Prog and VVDI2

How to: program VW Passat B7 ID48 Key using Xhorse VVDI Prog+ VVDI2.

Here we have a working key so need to add a spare key. The easiest way is to clone ID48 transponder with vvdi mini key tool. Here we did it with vvdi prog and vvdi2 because have no id48 token. Same procedure if all keys lost.

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 1

Run VVDI2 software->VW->4th Immobilizer system- VW/Skoda/Seat->VW Passat/CC Key Learn

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 2

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 3

Select OBDII Read Login Code+ Part memory data

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 4

You can read engine ECU, get PIN, CS
Switch ignition OFF, then switch ON

security access failed, vvdi2 cannot read the login code for current ECU.

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 5

So we need to remove comfort module to read eeprom

Remove comfort module, read m95320 data with vvdi prog
Save original dump

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 6

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 7

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 8

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 9

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 10

Assemble the comfort module and install it back on the car.

Go to VVDI2 again
VVDI2->VW->4th Immobilzier system- VW/Skoda/Seat->VW Passat/CC Key Learn->Load Comfort Module EEPROM (95320)

Upload eeprom just saved

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 11

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 12

Select Get PIN, VIN and search 7 bytes CS from dump file

decrypt 95320 dump file

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 13

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 14

Find 7th byte success
Make dealer key with 7 bytes CS

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 15

Put new key into vvdi2 programmer

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 16

Make dealer key success

Xhorse VVDI Prog VVDI2 Program Passat B7 ID48 All Keys Lost 17

Input number of keys to learn: 2
Select Key Learning
Press OKAY button to start learning. Insert dealer key into car and switch it on for at least 2 seconds.
Then change next key within 5s.
Learn key successfully

New key will start key successfully.

You need to program the ID48 chip or the transponder separately.

The remote should be adapted separately.

Get the remote programmed by vcds cable.

Done.

Program VW Passat B7 ID48 Key with Xhorse VVDI Prog+ VVDI2

4. January 2024.

How to Program BMW Key with VVDI2 and Godiag CAS2 CAS3 Test Platform?

Godiag CAS2 CAS3 Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers. It can be used with multiple BMW key programming devices like Xhorse, Autel, CGDI, Lonsdor, OBDSTAR, Xtool, AVDI etc to add key or do all keys lost on bench.

This test platform is suitable for magnetic semi-intelligent or smart keys. It does not do mechanical keys.

Here vvdishop.com shows how to use the godiag test platform with Xhorse vvdi2, vvdi bim tool or VVDI Key Tool Plus Pad.

Step 1: Connect the CAS2/CAS3, CAS3+ CAS3++ modules with vvdi2 or bimtool pro according to the connection diagram.

Use Godiag CAS2 CAS3 Test Platform with VVDI2 1

Step 2: Put the key into the key sensing area.

Step 3: Connect the power supply and the corresponding power indicator light will light up. The start/stop button light is on. The coil sensor light will flash. [Indicates that the module can send out the key sensing signal normally. If the key and the module are synchronized, the light will flash regularly or stay on. If the key and module are out of sync, the flashing will be irregular and will stop after one minute.]

Step 4: Press the start switch. [If the key is synchronized with the CAS module, the IMMO synchronization detection indicator light will light up and the internal buzzer of the machine will sound. If the key is not synchronized with the CAS module, the IMMO synchronization detection indicator light will not light up and the internal buzzer of the machine will not sound.]

Step 5: Press the analog start and stop button, the IMMO synchronization detection indicator light will go out after 3 seconds. Press the analog start/stop button again and the IMMO synchronization detection indicator light will light up.

The following uses Xhorse vvdi2 device to perform BMW CAS2/CAS3, CAS3+ CAS3++ semi-intelligent/smart key programming and matching operations:

1. Connect the CAS2/CAS3, CAS3+ CAS3++ module and the key programming diagnostic device according to the connection diagram.

2 Select “key learn—CAS Key Learn—Connect”.

3.After successfully identifying the CAS information, select “Get Key Info” and “Save Key Info”.

4.Select an unused key position, be sure to select the “prepare dealer key with programmer” menu, and use the VVDI2 key programmer to generate the key. If the key is placed in the GODIAG CAS2 CAS3 SER Semi Smart Test Platform key sensing area, the dealer key will not be generated.

5.After programming the dealer key, put the key into the Godiag CAS2 CAS3 SER Semi Smart Test Platform induction port for testing. For test steps, please refer to “Synchronous Detection of Module and Key”.

If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV”. [When performing synchronization, the key must be placed in the key sensing area of the VVDI2 device.

Use Godiag CAS2 CAS3 Test Platform with VVDI2 6

Use Godiag CAS2 CAS3 Test Platform with VVDI2 7

www.vvdishop.com

14. November 2023.

How to Solve Xhorse VVDI2 Software Not Working on WinXP?

Problem:

the entry point to the Initialize SRWLock procedure was not found in the DLL KERNEL32.dll
After upgrading xhorse vvdi2 software to version 7.3.5 on Windows Xp. Version 7.3.2 working ok. I tried it on 3 computers. This error is everywhere .The new update does not work on WindowsXP
What to do?

Solution:

Replace ConfigClient.dll file in that folders :

/BMW,
/transponder programer,
/vag,
/porsche

Feedback:

message” Initialize SRWLock procedure was not found in the DLL KERNEL32.dll” no longer shows.

30. October 2023.

Program Ducati Panigale 1199 Key by VVDI Prog and VVDI2

Ducati Panigale key programming 1199 reading eeprom with vvdi prog and programming transponder key with Vvdi2.

Choose new key position.

If choose a used key, when you open the switch the dash will ask for pin code.

Read motorola MC9S12P128 mcu with vvdi prog

Write key Ducati 1199 Panigale with vvdi2 via dump.

VVDI Prog and VVDI2 Program Ducati Panigale 1199 Key 1

VVDI Prog and VVDI2 Program Ducati Panigale 1199 Key 2

VVDI Prog and VVDI2 Program Ducati Panigale 1199 Key 3

VVDI Prog and VVDI2 Program Ducati Panigale 1199 Key 4

VVDI Prog and VVDI2 Program Ducati Panigale 1199 Key 5

24. October 2023.

Xhorse VVDI2 BMW BDC OBD Unlock Car No Communication Solution

Problem:

I was trying to add a new spare key to Bmw x1 2019 BDC with xhorse vvdi2 via OBD.

Now BDC has no communication, error SWFL Lost. Any solution?

Possible reason:

Failed to make sure proper voltage.

Solution:

Now you need to restore flash. You need to bench read flash and repair then write back to BDC.

Try to unlock on bench. Power supply stable at 13.5v. Try several times until flash writes ok.

Feedback:
Solved. Flash with esys and removed bdc job on bench and done!

14. August 2023.

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform

How-to: unlock BMW CAS4 and add a newer shape key using xhorse vvdi2 key programmer.

Vehicle model example: Bmw F02 750 Li

Get it out of the car because the transmission is 6HP and need to unlock on bench.

(Before that when this CAS was connected to the car, it gave a warning and told that this car is having 6 hp transmission you should do it by a programmer or on the bench)

Device used:

Xhorse vvdi2

BMW CAS4 test platform or godiag one

Xhorse CAS Plug

power supply

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 1

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 2

Procedure:

Connecting 12 volts power to the BMW CAS test platform and power switch is on

Run vvdi2 software->BMW software

Put working key and turn on ignition on

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 3

Press Connect to detect vehicle information

Software asks prepare dealer key and change km require unlock CAS4.

Press Unlock CAS4/CAS4+ function

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 4

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 5

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 6

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 7

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 8

Unlocking CAS4 module.

Unlock success you can make dealer key.

Get key info again.

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 9

VVDI2 says this unit no need programming.

Select prepare dealer key with programmer.

Record the following informations can be saved at your document

Insert working key into ignition

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 10

Then select an unused key position

Insert a new key

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 12

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 13

Unlock BMW CAS4 with Xhorse VVDI2 and Test Platform 14

it has been learned successfully.

Take all of them out and try to turn the power completely.

Both keys will turn ignition on.

Everything is working and the car is running.

www.vvdishop.com

19. July 2023.

Read BMW MSV80 DME ISN using Xhorse VVDI2

BMW MSV80 ISN reading using Xhorse VVDI2 successfully. The process takes about ten minutes.

Connection diagram is on the right of the vvdi menu.
Pin 44 and 22 of the left connector
No need to connect resistors.

If vvdi2 failed to read MSV80 DME ISN, you need to open it and move some components.
You can also Add the components from another DME or new. You can leave them in or remove them after. Some hardware versions had both sets, some only had one.

Or try bosch cable with vvdi prog or vvdi key tool plus with BMW ISN license.

25. June 2023.

2009 Audi A3 All Keys Lost by Xhorse VVDI2 VVDI Prog

Audi A3 2009 all keys lost is done by xhorse vvdi prog and vvdi2.

Save abs coding with vvdi2. (go into diagnostics and see coding option)
Remove clocks read 24lc32
Create service eeprom
Put clocks back
Write original eeprom back via obd
Read immo data
Save immo data
Generate dealer from immo data
Learn key with vvdi2.
Job done.
Vvdi prog used clip normal but hit miss with clip but this one was ok.

Xhorse VVDI2 Program Audi A3 2009 All Keys Lost 1

Xhorse VVDI2 Program Audi A3 2009 All Keys Lost 2

Xhorse VVDI2 Program Audi A3 2009 All Keys Lost 3

9. June 2023.

Xhorse Audi 754J Smart Key 6 EEP Config Error Solution

Problem:

When I generate Audi A6 2013 remote with xhorse vvdi 754J remote, vvdi2 gave 6-EEP config error.
I use the correct 754J AD006 ver1.1 remote and not XM38. Any idea?

Xhorse Audi 754J Smart Key 6-EEP Config Error 1

Xhorse Audi 754J Smart Key 6-EEP Config Error 2

Xhorse Audi 754J Smart Key 6-EEP Config Error 3

Solution:

In Transponder Programming function, go to Set Parameters dialog, set antenna gain value to 0, 1, 2, 3 respectively and apply. Then generate remote again.

When gain value smaller, the transponder position should be lower from antenna.

When gain value large, the transponder position should be higher from antenna.

www.vvdishop.com

6. June 2023.

Possible to Program VAG MQB49 5C Key with Xhorse?

Questions:

Q1: Can i make key VW Jetta 2020 and tiguan 2020 MQB49 5c with xhorse vvdi2?

Q2: How can I make key for Immo 5C with VVDI2, how to calculate?

Q3: How do i get immo data mqb49/5c on vvdi key tool plus?

Can I Make VAG Immo MQB49 5C Key with VVDI2 1

Can I Make VAG Immo MQB49 5C Key with VVDI2 2

Can I Make VAG Immo MQB49 5C Key with VVDI2 3

Answer:

Only Johnson Control instrument is supported by xhorse.
Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost.

Add key:

If the key is MQB49 or 5C you can add key with vvdi2 or key tool plus.

You need proper immo data file and key. If xhorse cannot calculate data, need to get immo data from 3rd party.

If the key is mqb49 (5c), i.e VW Tiguan 2022, is currently not supported. Not possible now with immo data file. You cannot make key with xhorse devices.

Key needs to get from dealer and activate online with Odis.

All keys lost:

No, it cannot be done with xhorse devices.

Need key of dealer and then odis.
Also odis can not program after-market keys only OEM.