Tag: Xhorse Condor XC-002 Pro

The upgraded version Xhorse Condor XC-002 Pro manual key cutting will duplicate dimple, double sided, single sided, 4 track external, 2 track external, 4 track internal, channel track keys. Here we will show how to cut a dimple key with condor xc-002 pro.

 

 

1. Insert the internal dimple probe and cutters

2. Insert the original key and the blank key using a shim

3. Rotate the knob to standard mode

4. Calibration. Follow the direction of the light until the middle light turns green

 

Make sure the clamp is in the corresponding position.

 

Turn on the cutter switch.

 

5. Duplicate the key
Press down the main handle to duplicate the key.

 

 

Turn off the switch after finishing one side cutting.
Clip the key and continue to cut the other side.

After finishing cutting the other side, turn off the switch and clean up.

6. Insert the dimple probe and cutter (external) to Xhorse Condor XC 002 pro.

Replace the internal dimple probe and cutter with external ones.

7. Switch the konb to dimple mode

8. Insert the keys
9. Finish the calibration.
Clamp the keys and finish calibration.

10. Duplicate the key
Turn on the cutter switch to cut key.
After finishing one side, turn off the switch.

 

Clip the key and continue to cut the other side.

 

After finishing cutting the other side, turn off the switch and clean up.

Now we have a working dimple key.

www.vvdishop.com

Xhorse Condor XC-002 Pro is the 2024 latest key cutting machine that I’ve got today. The machine is large and massive but simply excellent. When I took it in my hands, I realized that this was the best machine that I had. Now I’ll try to make a quick review for your guys.

 

 

The clamp is fixed by simply turning. I found there are 3 positions: A/B/C. Once I chose a well position, it’ll just be a convenient distance to the nearest vice. We generally clamp it with just one turn.

 

And then, what can these vices do? They can cut at any angles.

 

For example, to cut English-type keys or car keys. Inserted, clamped, set and cut accordingly key wave.

 

We take similar keys in which they are angular, the holes are made at an angle. The side clamp is suitable for this. We can set the desired angle and start cutting.

 

 

 

 

 

 

The clamp has a feat on itself and it fixes it from moving like this. This is such a convenient design.

 

Instead of the usual hexagonal clamp, to replace the cutter, you literally need to put the right one in a second and tighten it back. And the cutter is in.

 

Here shows the switching mode to the hole pattern.

There’s an adjustment, electronic adjustment, alignment of the cutter, and it even shows which way to turn. Now it shows screw it in. Here, bring it this direction. The green light is on, the cutter is set.

 

When you work with the keys, you don’t need to turn on and off button. The machine turns on automatically when lowered. The handle here is used to adjust the speed. Handle these quick-release cutters is just the second change. No need to click on or off the button. Just pull the handle down, then it worked and instantly adjust the positions of the vice.

 

In the planes, you don’t need to unscrew anything to tighten. It’s all done simply with your fingers. It’s very convenient. Everything is cool and the price will also be great.

 

 

 

 

Besides, there’s something in the side clamp. You can clamp such a key with this one. If it interferes, just insert it to the opposite direction. The clamp is very functional. In principle, most key types can be fit on.

 

The Condor XC-002 Pro booklet is clear. Here are what we can get from the package: a brush, 1 probe, 2 cutters, several stops and spacers for better clamping.

 

That’s all today’s review.

 

 

 

https://www.vvdishop.com/service/xhorse-condor-xc-002-pro-review.html