Xhorse Dolphin XP-005 Cut Acura Hon66 Laser Key via M2 Clamp

Today I’m gonna show how to use Xhorse Dolphin XP005 + VVDI Key Tool Max to copy a HON66 laser key.

 

Prepare a Honda original key & a new key blank.

Connect Key Tool Max with Dolphin XP005 via Bluetooth to smart control.

 

Vehicle database >> Acura >> MDX >> HON66 >> OK

Install M2 clamp, and fix the original key on it as prompts.

 

dolphin-xp005-cut-hon66-laser-key-1

 

dolphin-xp005-cut-hon66-laser-key-2

 

Decode key >> Continue

The Dolphin XP005 Machine starts coding key…

 

Wait until coding completed.

Take out the key to replace a key blank to fixed it on.

 

Go to Key Tool Max,

Cutting key >> Continue

Dolphin XP005 machine starts to cut the key…

 

One side cutting is finished.

Turn over the key blank to cut the other side.

Just repeat operations as before.

 

dolphin-xp005-cut-hon66-laser-key-3

 

dolphin-xp005-cut-hon66-laser-key-4

 

dolphin-xp005-cut-hon66-laser-key-5

 

dolphin-xp005-cut-hon66-laser-key-6

 

Okay, finally key cutting is done.

Look at that new key, it matches perfectly, same as the original one.

It can open the car door.

Completed!

 

dolphin-xp005-cut-hon66-laser-key-7

 

dolphin-xp005-cut-hon66-laser-key-8

 

 

This is a quick tutorial on using Dolphin XP005 key cutting machine to cut a HON66 key.

https://www.vvdishop.com/

Toyota Yaris 93C66 AKL by Xhorse Mini Prog Key Tool Max

Easy 3 steps to complete Toyota Yaris 93C66 all keys lost job without soldering.  Xhorse Mini Prog and key tool max are required here to finish the task.

Step 1: Read and save eeprom

Step 2: Prepare dealer key

Step 3: write back new dump file

 

Le’s get started.

 

toyota-yaris-akl-xhorse-mini-prog-1

 

toyota-yaris-akl-xhorse-mini-prog-2

 

In vvdi mini prog app, select EEPROM Flash function-ATMEL-AT93CXX-AT93C66 (pressure)
clean the 93c66 chip pin

 

toyota-yaris-akl-xhorse-mini-prog-3

Connect the 93c66 Eeprom chip with mini prog and pin adapter

 

 

toyota-yaris-akl-xhorse-mini-prog-4

Press Read EEPROM
Put the adapter on the chip (press the light button to turn on the floodlight)
Click continue below or press START button on mini prog to start operation

 

 

toyota-yaris-akl-xhorse-mini-prog-5

Read Eeprom data success, save data.

 

 

toyota-yaris-akl-xhorse-mini-prog-6

In xhorse key tool max app, select Special function-Immo data tool-File management-Local file
You can see the Eeprom file was saved to MINI PROG folder

 

 

toyota-yaris-akl-xhorse-mini-prog-7

 

toyota-yaris-akl-xhorse-mini-prog-8

 

 

Select Eeprom file, click More and copy the dump to MINI OBD folder

 

toyota-yaris-akl-xhorse-mini-prog-9

In key tool max app, select Immo data tool-Aisa-Toyota-Yaris-2003 93c66-start execution

 

 

toyota-yaris-akl-xhorse-mini-prog-10

upload dump in MINI OBD folder
Insert a vvdi super chip into the indiction coil

 

 

toyota-yaris-akl-xhorse-mini-prog-11

Select an unused key position and prepare dealer key
Select use vvdi super chip
Making key in progress
Prepare dealer key success. It can start car engine after write back new dump file.
Add another key need load the new data file.
Press ok to continue

 

 

toyota-yaris-akl-xhorse-mini-prog-12

Save new key file to MINI PROG folder

 

 

toyota-yaris-akl-xhorse-mini-prog-13

 

In mini prog app, select EEPROM Flash function-ATMEL-AT93CXX-AT93C66 (pressure)
clean the chip pin
Connect mini prog and chip via pin adapter

 

toyota-yaris-akl-xhorse-mini-prog-14

This time select Write Eeprom
Upload new dump form MINI PROG folder to write back

 

toyota-yaris-akl-xhorse-mini-prog-15
Write success. The new key can start engine now.
Reinstall the Immo box to the vehicle and test the new key.

http://blog.vvdishop.com/toyota-yaris-93c66-all-keys-lost-done-by-xhorse-mini-prog-and-key-tool-max/

Xhorse VVDI Key Tool Max Unlock and Program Toyota 8A Smart Key

How to unlock & program a Toyota 8A Smart Key using with Xhorse VVDI Key Tool Max + Mini OBD Tool via OBD?

 

This is a Toyota Smart Key that was already programmed to another vehicle. Now I’m gonna unlock and reprogram it, here we go.

 

xhorse key tool max mini obd toyota 8a smart key 1

 

  • Unlock Key

Plug VVDI Mini OBD Tool into OBD for connection.

Let’s read the key first, it is “Have learned”.

 

Go back to main page on Key Tool Max, press

Special function >> Unlock Toyota Smartkey >> Unlock

 

Unlock OK.

 

Go back to read the smart key again.

It is “Blank”.

So now we can use the 8A Smart Key to program to a new Toyota.

 

xhorse key tool max mini obd toyota 8a smart key 2

 

xhorse key tool max mini obd toyota 8a smart key 3

 

xhorse key tool max mini obd toyota 8a smart key 4

 

xhorse key tool max mini obd toyota 8a smart key 5

 

xhorse key tool max mini obd toyota 8a smart key 6
  • Program Key

Go to Mini OBD Tool main page, press

Immo programming >> Toyota >> Select by type >> Smart key system >> Type 3 (8A smart card) >> Start execution >> Add a key

 

xhorse key tool max mini obd toyota 8a smart key 7

 

xhorse key tool max mini obd toyota 8a smart key 8

 

xhorse key tool max mini obd toyota 8a smart key 9

 

xhorse key tool max mini obd toyota 8a smart key 10

 

xhorse key tool max mini obd toyota 8a smart key 11

 

 

Please switch ignition on.

 

Confirm key number, press “OK”.

 

Hold the 8A Smart Key touching on the IG switch, after hearing beep twice, key registration succeeded!

 

Test the key, it does work!

Key programming has done.

 

xhorse key tool max mini obd toyota 8a smart key 12

 

xhorse key tool max mini obd toyota 8a smart key 13

 

xhorse key tool max mini obd toyota 8a smart key 14

 

xhorse key tool max mini obd toyota 8a smart key 15

 

 

This is using VVDI Key Tool Max & Mini OBD Tool to unlock & reprogram a Toyota 8A Smart Key successfully.

https://www.vvdishop.com/

Program 2020 Kia Sportage Key by Xhorse Mini OBD Tool

Xhorse VVDI Key Tool Max + Mini OBD Tool support to program a new remote for 2020 Kia Sportage success. This key isn’t a transponder key, a regular lxp90 blade is able to crank it. Now I’m about to show its procedure.

 

Plug VVDI Mini OBD Tool into OBD2 port, connect it with Key Tool Max via Bluetooth.

 

xhorse mini obd 2020 Kia Sportage Key 1

 

 

Immo programming >> Kia >> Select from model >> US market >> Sportage >> Remote key adaptation >> Start execution

 

Wait loading until 100%…

 

Please choose OBDII interface and turn on the ignition switch to ON.

Press “OK”.

 

Switch ignition off, remove the key, press “OK”.

 

xhorse mini obd 2020 Kia Sportage Key 2

 

xhorse mini obd 2020 Kia Sportage Key 3

 

xhorse mini obd 2020 Kia Sportage Key 4

 

 

Press UNLOCK or LOCK button for more than 1 second.

 

Match 1 remote successfully.

Press “OK” to program next one, press “Cancel” to complete.

 

You’ll hear a beep when match completed.

 

Remote match completely.

Press “OK”.

 

Let’s test the key, all are workable.

Key programming was done!

 

xhorse mini obd 2020 Kia Sportage Key 5

 

xhorse mini obd 2020 Kia Sportage Key 6

 

This is using VVDI Key Tool Max & Mini OBD Tool to add a remote for 2020 Kia Sportage. This key doesn’t have a chip so I only programmed the remote to vehicle.

https://www.vvdishop.com/

Xhorse Key Tool Max Generate 40 bit 4D Ford Transponder

Here is the using tips of xhorse vvdi key tool max on generating 40 bit 4d ford transponder key.

 

Use super chip and generate the chip by selecting the option for the chip (New 4D chip (40 bits)).
key tool max ford 4d 40bit
Ford 80 bit chips are backwards compatible with the 40 bit keys. Just stock the 80 bit and you good to go.
Don’t delete keys as you can only use 1 super chip and need 2 keys minimum to program in or car won’t start.
Just add key, don’t do akl (all keys lost), you can add 1 key without another key by selecting add key instead of AKL.

Xhorse Mini Prog + VVDI Key Tool Max Program 2013 VW CC 95320

How to use Xhorse Mini Prog + VVDI Key Tool Max to program a dealer key M95320 for 2013 Volkswagen Passat CC? Today I’ll demonstrate it on bench.

 

Read & Save EEPROM

Remove the outer shell to take out chip.

Hold and push Mini Prog straight down on the M95320 chip.

Press on Key Tool Max meanwhile,

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-1

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-2

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-3

 

 

EEPROM and FLASH >> ST >> M95XXX >> M95320(pressure) >> Read >> EEPROM >> Start operation >> Continue >> Rename, OK

 

(Note: DO NOT lay down Mini Prog during reading.)

 

Read & save EEPROM file successfully.

The Mini Prog screen will show an OK button, which means “Done”.

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-4

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-5

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-6

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-7

 

 

 

Program Dealer Key

Switch to Xhorse Key Tool Max function page, press

Special function >> Immo data tool >> Europe >> VW >> Passat >> Comfort ID48 – 95320 >> Start execution >> Load EEPROM file

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-8

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-9

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-10

 

 

Select an unused key position: key 4, press “Prepare dealer key”.

 

Select “Megamos 48”.

Place a new key into Key Tool Max coil.

OK >> OK

 

Prepare dealer key success.

It can start engine after write back new dump file.

Press “OK” to save the new dump file.

Rename, save >> OK

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-11

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-12

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-13

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-14

 

 

Let’s go back to Xhorse Mini Prog page to write new dump file.

EEPROM and FLASH >> ST >> M95XXX >> M95320(pressure) >> Write >> EEPROM >> Start operation >> Select dump file to load

 

Turn on Mini Prog and hold it straight on M95320 chip again.

Start operation >> Continue

(Note: DO NOT lay down Mini Prog during writing.)

 

Write completely.

Key programming has done!

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-15

 

xhorse-mini-prog-key-tool-max-2013-vw-cc-16

 

 

Program 2013 VW Passat CC a M95320 key with Xhorse Key Tool Max & VVDI Mini Prog was successful!

https://www.vvdishop.com/

How to Read Renault BCM 95040 with Xhorse Mini Prog and Key Tool Max?

How to use Xhorse VVDI Mini Prog & Key Tool Max to read Renault Duster BCM IC95040 eeprom? As below I’ll show step by step.

 

Tools

A Renault Duster BCM IC95040 module

A VVDI Mini Prog

A VVDI Key Tool Max

 

xhorse-mini-prog-renault-duster-95040-1

 

 

Connect Mini Prog with Key Tool Max via Bluetooth firstly.

 

Remove BCM IC95040 outer shell, hold & push Mini Prog down straight on chip to read;

 

xhorse-mini-prog-renault-duster-95040-2

 

xhorse-mini-prog-renault-duster-95040-3

 

 

Press on Key Tool Max,

EEPROM and FLASH >> ST >> M95XX >> M95040(pressure) >> Read >> Eeprom >> Start operation

 

It is loading on the Mini Prog screen meanwhile, wait until 100%…

 

Rename and press “OK” to save data file.

 

xhorse-mini-prog-renault-duster-95040-4

 

xhorse-mini-prog-renault-duster-95040-5

 

xhorse-mini-prog-renault-duster-95040-6

 

xhorse-mini-prog-renault-duster-95040-7

 

xhorse-mini-prog-renault-duster-95040-8

 

 

Read EEPROM successfully.

Now you can use it with VVDI Super Chip to program transponder.

 

Using VVDI Mini Prog + Key Tool Max programmer to read EEPROM is quite easy & efficient.

https://www.vvdishop.com/

Program CHRYSLER 300 Proximity by Xhorse Key Tool Max

Success report:  program 2011-2017 CHRYSLER 300 Xhorse proximity no issue with xhorse vvdi key tool max and mini obd tool.

 

Main steps:

1. Generate smart key

2. Read password

3. Program smart key

 

 

Procedure:

In Key Tool Max app, select Vehicle Remote->Chrysler->Chrysler KeylessGo ID46 433MHz proximity

 

xhorse-chrysler-300-proximity-1

 

xhorse-chrysler-300-proximity-2

 

Read programming instruction and press Generate remote

 

xhorse-chrysler-300-proximity-3

 

 

Insert xhorse universal smart prox into key tool max 

Generate xhorse remote success

 

xhorse-chrysler-300-proximity-4

 

xhorse-chrysler-300-proximity-5

 

 

Insert Xhorse Mini OBD Tool with vehicle via OBD socket

 

xhorse-chrysler-300-proximity-6

in Mini OBD App, select IMMO Programming->Chrysler->Select by type->Type 1->Read password

 

 

xhorse-chrysler-300-proximity-7

 

 

 

xhorse-chrysler-300-proximity-8

 

 

xhorse-chrysler-300-proximity-9

Start execution
Turn on ignition switch
read password ok

 

 

xhorse-chrysler-300-proximity-10

Select Add a Key->Type 1

 

 

xhorse-chrysler-300-proximity-11

Turn on security light and turn off the ignition switch

 

 

xhorse-chrysler-300-proximity-12

Mini obd will ask to enter 4-digit password to access

 

xhorse-chrysler-300-proximity-13
Put the wanted adding smart keys at the central control position or close to the start button, click UNLOCK button repeatedly within 30 seconds, until door lock reacts.
programming is completed

 

xhorse-chrysler-300-proximity-14

 

xhorse-chrysler-300-proximity-15

test remote control and start vehicle with the new prox

 

xhorse-chrysler-300-proximity-16

User are allowed to customize the vvdi smart key in key tool max’s special function as well.

http://blog.vvdishop.com/xhorse-key-tool-max-mini-obd-program-chrysler-300-proximity/

Program 2015 Toyota RAV4 H Chip All Keys Lost by Xhorse Key Tool Max and Mini OBD

Xhorse vvdi 8A adapter kit works perfectly on Toyota RAV4 2015 (with H chip, none-smart key) when all keys lost.  This procedure works with other Toyota 8A chip as well, i,e  a Toyota Hilux 2018.  The vvdi 8A cable kit works until 2019 in normal key.

You need to modify the connector that goes to the coil plug because some are different.
Device required:
(Other cables that connected where the relay goes are included in the xhorse 8A cable kit.  This is for standard 8A turn keys, no smart key)
xhorse app will show you wiring diagram, you can also check wiring here 
Procedure:
xhorse-toyota-rav4-2015-akl-1

 

Disconnect positive terminal

 

xhorse-toyota-rav4-2015-akl-2

Locate IGN2

 

 

xhorse-toyota-rav4-2015-akl-3

 

xhorse-toyota-rav4-2015-akl-4

 

 

Relay in Passenger side fuse box

 

xhorse-toyota-rav4-2015-akl-5

Plug in the VVDI J3 Relay

 

 

xhorse-toyota-rav4-2015-akl-6

Plug the J5 pLug into the reader harness

 

 

xhorse-toyota-rav4-2015-akl-7

 

xhorse-toyota-rav4-2015-akl-8

Connect J4 obd plug with vehicle via OBD socket

 

 

xhorse-toyota-rav4-2015-akl-9

Connect vvdi 8A cable with J6 plug

 

 

xhorse-toyota-rav4-2015-akl-10

Then connect Xhorse Mini OBD Tool with 8A adapter

 

 

xhorse-toyota-rav4-2015-akl-11

Connect power supply cables

 

 

xhorse-toyota-rav4-2015-akl-12

Connect xhorse key tool max with the mini OBD via Bluetooth

 

 

xhorse-toyota-rav4-2015-akl-13

Select 8A Immo box all key lost- OBD make master key

 

 

xhorse-toyota-rav4-2015-akl-14

Put a VVDI super chip into key tool max, prepare to make master key which can start car directly

 

 

xhorse-toyota-rav4-2015-akl-15

 

xhorse-toyota-rav4-2015-akl-16

 

 

Calculate online and generate master key success
Jobs done.

www.vvdishop.com

How to Add BMW CAS3 Key by Xhorse Key Tool Max and Mini Prog?

Purpose

Using Xhorse VVDI Key Tool Max & Mini Prog to program a new key for BMW CAS3+ on bench.

 

Tools

BMW CAS3/CAS3+, dashboard, ignition modules

BMW CAS3/CAS3+ Solder-free Adapters

VVDI Key Tool Max

Xhorse Mini Prog

An old BMW key & a new key

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-1

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-2

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-3

 

 

Procedure

 

Read EEPROM

Connect Key Tool Max with Mini Prog via Bluetooth.

Go to Mini Prog main page, press

IMMO >> BMW >> CAS3+(0L15Y)(ADAPTER)

 

Connect CAS3+ chip with BMW adapter & Mini Prog.

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-4

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-5

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-6

 

Read >> EEPROM >> Start operation

 

Press “Continue” or START button on Mini Prog to start operation.

 

Rename and press “OK” to save file.

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-7

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-8

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key9

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-10

 

 

Program Key

Go back to Xhorse Key Tool Max main page, press

Special function >> Immo data tool >> Europe >> BMW >> CAS3+(0L15Y, 0M23S) >> CAS3+ >> Start execution >> Return button

 

Select data file saved just now.

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-11

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-12

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-13

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-14

 

 

Select an unused key position: Key 5, press “Prepare dealer key”.

 

Select “PCF 7936(PCF 7942/43/44345)”, press “OK”.

 

Put the old key into Key Tool Max coil slot.

Select “Have a working key. Insert working key to programmer and continue”, press “OK”.

 

Change to input the new key to Key Tool Max coil slot instead, press “OK”.

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-15

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-16

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-17

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-18

 

 

Is the new key with keyless? No.

 

Prepare dealer key success.

It can start engine after write back new dump file.

Add another new key need load the new data file.

Press OK >> Save file >> Rename & OK

 

Save file success. Press “OK”.

 

Let’s test the key in the end, both keys can start the engine.

Completed!

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-19

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key-20

 

xhorse-key-tool-max-mini-prog-bmw-cas3-key21

 

 

BMW CAS3+ adds a key by reading EEPROM with VVDI Mini Prog + Key Tool Max programmer successfully.

https://www.vvdishop.com/