How to Set up Xhorse MVCI Pro J2534 for HDS TIS SSM4 ODIS

Xhorse MVCI PRO J2534 Passthru Cable is designed for multi-vehicle and multi-protocol diagnostics, compatible with D-PDU and J2534 diagnostic standards.

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 1

 

It can meet mainstream automotive industry standards to support multiple automotive manufacturers like Audi, Lamborghini, Bentley, VW, Toyota, Honda, Ford, Subaru, Mazda, etc. Besides, it also supports CAN, CAN_PS, ISO15765…various communication protocols.

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 2

 

These original diagnostic software (ODIS, TIS, HDS, SSM4, Ford IDS, Mazda IDS) are currently compatible and more will be updated.

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 3

 

How to use Xhorse MVCI PRO?

Click “Connect” in MVCI PRO software – here we can view device info like firmware version number, serial number, etc.

 

Read Authorization – here we can read the device authorization status & available times.

 

Update Authorization – here we can update the latest authorization status & reset the available times.

 

Vehicle Diagnosis – here we can install the driver required for the corresponding brand so that the operation on the original diagnostic software is successful.

 

Upgrade – here we can upgrade software & firmware.

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 4

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 5

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 6

Xhorse MVCI PRO Replace VW VAS6154

For Volkswagen, Xhorse MVCI programming cable supports PDU protocol and can replace VAS6154. The detailed steps are as follows:

  • Open the MVCI PRO software: Vehicle Diagnosis >> Volkswagen, uninstall the existing driver first and then install.
  • Click “Yes” to install the 6154 mode, which is compatible with the PDU protocol.
  • Click “No” to install the 5054 mode, which is compatible with the PassthruJ2534 protocol.
  • Click “Yes” to finish the installation.

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 7

 

 

 

Xhorse MVCI PRO Diagnose HONDA

  • Connect MVCI PRO J2534 cable between the vehicle module & computer.

 

  • Run HONDA original diagnostic software to automatically read VIN number. If the VIN hasn’t automatically filled in, we’d better check whether the cable connection is successful. If the OBD voltage is detected, the signal light will be solid green.

 

  • Click “Honda System”, here will provide a list of systems. We can perform diagnostics as needed.

 

Eg. Click “ONE-PUSH START >> KEYLESS ACCESS CONTROL Unit >> DTCs”, here will display the diagnostic trouble code & related description.

To clear DTCs. Click the 4th icon on the right, then press ENTER to clear codes.

 

Now the DTCs have been cleared.

So we can use the same method to diagnose other systems.

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 8

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 9

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 10

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 11

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 12

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 13

 

Xhorse MVCI PRO J2534 Passthru Cable User Guide 14

 

 

www.vvdishop.com

How to Set up Xhorse MVCI Pro with Honda HDS on Win7?

Here’s a guide on setting up Honda HDS (Honda Diagnostic System) software and xhorse mvci pro j2534 cable on windows 7 64bit.

 

The VCI cable used here is an Xhorse MVCI Pro J2534 that was bought on vvdishop.com.  It comes with a regular USB A plug and a built-in USB to serial adapter. Some tried running it on a VirtualBox VM with no luck. Installing it on the laptop itself fixed the cable software and authorization issues I had.
Hardware needed:
-Xhorse mvci pro j2534 cable
-A pair of USB sticks. 16GB or more preferred.
-A laptop with at least 4GB RAM and 40GB of free disk space for the win7 partition. If you have a spare laptop laying around that you can wipe without worry, that’s even better.

Software needed:
-Win7 x64 SP1 ISO with as many updates rolled in as possible.
-Win7 drivers for your laptop. Hopefully your laptop manufacturer has one big setup file you can download.
-Xhorse MVCI Pro
-Honda HDS suite with HDS and iHDS.
-Rufus (for windows) or woeUSB with 7z for Linux users to create a bootable win7 USB.
-Bootable gparted USB stick for resizing your current disk partitions and creating the partition for win7.

Most halfway modern laptops won’t have a DVD drive so you’ll install win7 by creating a bootable USB drive. A dd type operation where the .iso is copied onto the stick byte by byte doesn’t work with win7 like it does with Linux isos. So you’ll have to use Rufus if you’re on windows, or woeUSB if you’re running anything Linux based. Make sure you have “7z” command installed, since woeUSB uses it to build the EFI boot guts required to install win7 on gpt partitions that have been the standard for many years now. If you will not dual boot, then it gets a lot simpler.

Make sure you disable Secure Boot and enable legacy boot ROMs (that’s what it’s called in my dell BIOS). Another gotcha you might run into is having to temporarily change your SATA controller mode from AHCI to ATA. To change it back after the install, do the regedit hack to update the setting in win7, shut down, change the settings in BIOS and boot win7 to verify it still boots normally (you’ll know it worked when it boots and prompts to restart again).

The long and hard part is over. Go ahead and install the MVCI Pro software and reboot. Plug in the xhorse cable and wait for the drivers to finish load. Open the MVCI Pro and click on the connect button. Once it’s connected and you see the serial number, go ahead and click “read authorization”. It will show nothing but you should not get any error messages like ff03 like I did on a VM. Click “update authorization”. After a few seconds you’ll see the authorization list update with 999 count and all the makes in the green.

Go to the service tab and install the Honda HDS driver. The software is a bit clunky and you might have to click a couple times to get the installer to come up.

Now time to install HDS and iHDS. Click the setup in the root of the downloaded HDS suite and it will install HDS. Once that’s done, go to the iHDS subfolder on the install folder and run the installer for iHDS since it appears HDS needs to be launched from within iHDS. Don’t ask me why lol!

Finally, you can launch the iHDS and select XH-HONDA in the interface selection.

 

xhorse mvci pro and honda hds 1

 

xhorse mvci pro and honda hds 2

 

xhorse mvci pro and honda hds 3

 

It should all be point and click from there, folks!

Xhorse MVCI Pro ODIS V23 Test Report

Xhorse MVCI Pro J2534 was tested working with VW Audi Skoda Seat ODIS-S service software V23 and ODIS-E Engineer software V17.

 

xhorse mvci pro

 

Software version: ODIS-S V23.0.1/ ODIS-E V17.01

odis-e v17

odis s v23

License: Included License Standalone and License for all brand

Compatible device: Xhorse MVCI Pro (and other passthru devices VXDIAG VCX SE 6154, openport 2, vnci 6154a, godiag j2534 etc)

Operating system: Win10 or later O/S, RAM>4G. Win7 is not supported since this version.

Language: Multi-language

 

Both software can be downloaded for free. But not include keygen.

 

If need activation, contact

Skype:VVDIfactory.com
Email:sales@VVDIShop.com
WHATSAPP:+86?13559259147

We will send software in U disk format which contains 1 time free activation for both ODIS-S and ODIS-E software.

 

 

Tested models by far:

Model VIN ECU Type Protocol ODIS S 11 ODIS S 23.0.1 ODIS E 17.01
2007 AUDI A6 LFV3A24F273054910 MED9.1 KWP2000
2005 VWCaddy LFVBC32K053000112 EDC16U1 KWP2000
2007 VW Passat WVWVU73CX7E001193 CAN BUS
2017 VW Passat LFV3A23C5H3071340 SIMOS 18.3 CAN BUS
2008 Audi A6 WAUDH74F98N068455 SIMOS 6.22A CAN BUS
2008 VW Passat LFV3A23C583003748 MED17.5 CAN BUS MVCI Pro supports full system diagnostics (other J2534 only OBD scan)
2008 AUDI A6 LFV5A24F783014364 SIMOS 8.10 CAN BUS X X

 

Steps to Install ODIS-S/ODIS-E

1.Install Setup

2.Activate software

3. Install PostSetup

4. Install driver

5. Run software

 

MVCI Pro J2534 driver is included in the U disk.

mvci pro j2534 driver

www.vvdishop.com

GM Tech2win Cannot See Xhorse MVCI Pro?

Problem:

I got the xhorse mvci pro passthru to work with GM Tech2win software, after install Tech2win and connect vci, i cannot see mvci pro device. Any idea?

 

GM Tech2Win cannot see Xhorse MVCI Pro passthru 1

 

 

Solution:

To use software with mvci pro, you have to install the corresponding driver in device manager.

 

GM Tech2Win cannot see Xhorse MVCI Pro passthru 2

 

Xhorse has not released driver for GM GDS2/Tech2win yet. So it cannot be used with mvci pro.

Compatible Software list:

VAG ODIS

Ford/Mazda IDS

Toyota Techstream

Honda HDS

Subaru SSM4

How to Install Xhorse MVCI Pro with Toyota Techstream?

Xhorse MVCI Pro J2534 cable is tested working fine with Toyota Techstream V18.00.008 software.

 

MVCI Pro does not have CD software. Contact www.vvdishop.com customer service to download Techstream v18 and patch.

 

How to use Xhorse MVCI Pro with Toyota Techstream?
Download Toyota Techstream V18.00.008

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 1

Install Techstream_Setup
Accept license agreement

 

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 2

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 3

 

Inter user name and company name randomly

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 4

Finish installing setup
Download and Install MVCI Pro J2534 driver

 

http://blog.vvdishop.com/free-download-xhorse-mvci-pro-j2534-driver-software/

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 5

Copy and paste Techstream Patch to desktop

 

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 6

Connect MVCI pro cable with laptop
Check device is connected in Device Manager

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 7
Run MVCI Pro driver
Detect device status

Make sure update driver software and firmware to latest version.

Set up Xhorse MVCI Pro with Honda HDS 9
Right click to install Toyota driver

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 9

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 10

 

Software is ready to use
Run Techstream from desktop

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 11

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 12

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 13

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 14

 

Use Toyota Techstream for Xhorse MVCI Pro J2534 15

How to Install Honda HDS Software for Xhorse MVCI Pro?

Xhorse MVCI Pro J2534 interface is tested working with Honda HDS diagnostic system software.  Here is the instruction on how to set up Honda HDS for MVCI pro.

 

Download Honda HDS V3.102.051

password: ntadgm

Download Honda HDS V3.104.024

password: hecsv3

 

*If don’t need newer 3.104 version, just install 3.102 version.

*If need to use 3.104 hds with mvci pro, you should install 3.102 first, then install 3.104.

 

Procedure:

 

Set up Xhorse MVCI Pro with Honda HDS 1

 

Install HDS 3.102 setup
Press Next
Accept license agreement
Select region- Other region

Select country
Enter dealer code: 123456

 

Set up Xhorse MVCI Pro with Honda HDS 2

Select setup language 

 

Set up Xhorse MVCI Pro with Honda HDS 3

Finish installing HDS 3.102 software 

 

Set up Xhorse MVCI Pro with Honda HDS 4

 

 

Set up Xhorse MVCI Pro with Honda HDS 5

 

Install HDS 3.104.024 setup until finished.

 

Run Honda FIX patch to crack HDS

 

Set up Xhorse MVCI Pro with Honda HDS 6

 

Download and Install MVCI Pro driver

Free Download Xhorse MVCI Pro J2534 Driver Software

 

Set up Xhorse MVCI Pro with Honda HDS 7

Connect MVCI Pro j2534 cable with laptop 

 

Set up Xhorse MVCI Pro with Honda HDS 8

Check device is connected in Device Manager
Run MVCI Pro j2534on desktop 

Set up Xhorse MVCI Pro with Honda HDS 9

Check device connection status

 

Set up Xhorse MVCI Pro with Honda HDS 10
Set up Xhorse MVCI Pro with Honda HDS 11

Make sure update software and firmware to latest version 

Set up Xhorse MVCI Pro with Honda HDS 12
Install Honda driver in MVCI pro

Software is ready to use.

Run HDS software

Set up Xhorse MVCI Pro with Honda HDS 13

Set up Xhorse MVCI Pro with Honda HDS 14

www.vvdishop.com

How to Fix Xhorse MVCI Pro Sync Authorization 2 Failed Error?

Problem:

I got the xhorse mvci pro j2534 cable connected and try to update authorization, but failed, says error “Sync authorization 2 failed! Error code: ff02”

 

Fix Xhorse MVCI Pro Sync Authorization 2 Error 1

 

Solution:

[Read Authorization]:  You can read the current device authorization status and available times. (Note: When the number of available times is 0, the use of most functions will be limited)

[Update Authorization] You can update the latest authorization status of the device and reset the available times.

 

Users have to update both software and firmware to latest versions, then update authorization.

xhorse mvci pro firmware and software

Where to Download Xhorse MVCI Pro Driver?

Xhorse released a new MVCI Pro J2534 diagnostic cable for VAG ODIS, Toyota Techstream, Honda HDS, Subaru SSM4, Ford IDS, Mazda IDS etc.

 

Download and Install Xhorse MVCI Pro J2534 Driver 1

 

Here vvdishop.com provides mvci pro j2534 driver download free.

 

download Xhorse mvci pro j2534 driver

https://mega.nz/file/MuoiBJZa#MjmQNzgll4pJEERnq1v__sHx6n3C9nr-cMwJqChNPAs

 

How to Install Xhorse MVCI Pro j2534 driver?

Download and Install Xhorse MVCI Pro J2534 Driver 2

Download and Install Xhorse MVCI Pro J2534 Driver 3

Download and Install Xhorse MVCI Pro J2534 Driver 4

Download and Install Xhorse MVCI Pro J2534 Driver 5

 

How to use Xhorse MVCI Pro J2534 cable?
1. Download J2534 compatible software
The device is compatible with original diagnostic software.
Xhorse does not provide software download, download software from 3rd party or original manufacturer’s website.

 

2. Download and install MVCI Pro J2534 software

3. Connect MVCI Pro cable with laptop and vehicle

Download and Install Xhorse MVCI Pro J2534 Driver 6

 

 

Run MVCI Pro driver

Connect j2534 cable

Download and Install Xhorse MVCI Pro J2534 Driver 7

Install car drivers you desired, current available drivers, VW, Honda, Toyota, Ford, Mazda and Subaru. Keep updating.

Download and Install Xhorse MVCI Pro J2534 Driver 8

Check current latest mvci pro software and firmware version

Current software version: V1.0.3

Current firmware version V1.2.0

Both software and firmware version can be updated online.

Download and Install Xhorse MVCI Pro J2534 Driver 9

Setting option

Download and Install Xhorse MVCI Pro J2534 Driver 10

After install software, device driver you can run diagnosis.

https://www.vvdishop.com/service/install-xhorse-mvci-pro-j2534-driver.html