Question:
Can a SC1 blank be cut by numbers with the Xhorse dolphin xp005 key cutting machine? Have the M4 clamp. But I only have numbers to work with. No original keys.
Solution:
Yes, Xhorse Dolphin will cut SC1 household key blank by numbers.
The 10 depths are 0-9 for a sc1. On the dolphin you can’t use 0. This means that you must input all 1 digit higher…a 0 is inputted as a 1….1=2…so on…9=10
Input these screen shots under custom key data and this should work for you. Just when put key on m4 clamp, align shoulder to the clamp. Do not use the spacer.
Just search for depth and space charts and convert to mm if it’s in inches..and plug values in.
You can also buy the key profile or do it yourself. Like best keys, sch, kw, y11, y12, and some more.
