Xhorse VVDI Tools Software and Hardware

23. August 2024.

Read Land rover Encrypted KVM 9S12XEQ384 by Xhorse Multi Prog

Xhorse Multi Prog read Land Rover 2016-2019 encrypted KVM 9S12XEQ384 with XDNP16 KVM solder free adapter successfully.

Connect XDNP16 KVM adapter with multi prog via DB25 connector.

Xhorse Multi Prog Read Land Rover Encrypted KVM 2

Xhorse Multi Prog Read Land Rover Encrypted KVM 3

Xhorse Multi Prog Read Land Rover Encrypted KVM 4

Xhorse Multi Prog Read Land Rover Encrypted KVM 5

Xhorse Multi Prog Read Land Rover Encrypted KVM 6

In Multi-prog software, select Land rover->RFA Secured 9S12XEQ384 (Adapter)

Read D-flash

Read eeprom D-flash successfully.

Xhorse Multi Prog Read Land Rover Encrypted KVM 9

Read P-flash

Read P-flash in 1min 33s.

Save p-flash.

Note: If you have chip crack failure error when reading KVM with the XDNP16 KVM adapter, clean the 1st and 3rd leg on the Oscillator and adjusting the Pogo pins inwards usually solves the cracking issues.

22. August 2024.

BMW Motorcycle Tire Pressure Monitor Malfunction Coding by VVDI BIMTool pro

If you have a Tire Pressure Monitor malfunction DTC error after programming BMW 4D/8A motorcycle keys with VVDI Key Tool Plus or VVDI2, here is the working solution.

BMW Motorcycle Coding by VVDI BIM Tool Pro 1

The problem can be solved by VVDI BIM Tool or VVDI BIMTool Pro programmer.

Connect BIMTool pro with laptop and motorcycle.

Run VVDI BMW software.

Go to “Program/Code” function.
Auto detect and connect Car to retrieve vehicle information.

Select Vehicle Programming.
Make sure “target istufen lev” is the same as the “Shipment date”.

If there is no shipment date available, choose the latest one.

Click on “FEM” and press “Calculate programming file”, press Yes to confirm

BMW Motorcycle Coding by VVDI BIM Tool Pro 6

The calculation is completed.

Gray areas indicate the current module version information.

Orange areas indicate the programmable version information.

Click Programming to proceed.
Auto input VIN code.
Programming finished.

BMW Motorcycle Coding by VVDI BIM Tool Pro 11

After programming is completed. Read and clear DTCs.

No DTC display on BMW motorcycle dashboard.

Done.

www.vvdishop.com

21. August 2024.

Xhorse Multi Prog USB device is not recognized Solution

Problem:

Xhorse Multi prog was not detected by the Windows 7 system. It says USB device is not recognized. Any solution?

Xhorse Multi Prog USB Device Not Recognized 1

Xhorse Multi Prog USB Device Not Recognized 2

Solution:

If it is Windows 7 system, you should install driver for multi prog manually.

Follow guide here to install driver for Win7.

How to Install Xhorse Multi Prog Software Driver?

If Win10, it will automatically install driver.

www.vvdishop.com

20. August 2024.

Solved! Xhorse Dolphin XP005L Error Code 5

If you had error code 5 when cutting key with Xhorse Dolphin XP005L key cutting machine (error images shown below), here is the possible solution.

Solution:

Remove those 3 screws set from probe base.

Check the small wire and clean up iron filings.

19. August 2024.

Xhorse VVDI Key Tool Plus Read Volvo XC-90 2021 CEM Data

It is a Volvo XC-90 2021. We need to add a spare key to it using Xhorse VVDI Key Tool Plus. We need to read CEM data first and program key.

Step 1: Read CEM data
Remove CEM module. Find chip 0N78S. Read this chip data.

VVDI Key Tool Plus Adds 2021 Volvo XC-90 Key 1

VVDI Key Tool Plus Adds 2021 Volvo XC-90 Key 2

Connect Xhorse Volvo CEM XDNP52 (MPC5748G) solde free adapter with CEM module and key tool plus.

Select IMMO Programming->Volvo->XC90->2015 onwards-> Smart key system
Read the CEM Data->Adapter method
Read and back up CEM data.

Step 2: Program Key
Select Add smart key
Load the CEM module data we read in step 1 to obtain 10-digit pin code

Turn Start knob to the right once then release.

Place original key into sensoring area (cup holder)

If programming failed, change the key in the sensoring area for different positions.

Program 1st key successfully.

Repeat the same step to program next key.

www.vvdishop.com

13. August 2024.

Repair Audi Air Suspension Module by Xhorse VVDI Prog

Here is the Audi Air Suspension Control Unit.

Xhorse VVDI Prog Flashes Audi Air Suspension Control Unit 1

It has 2 micro chips.

The first microcontroller.

The second microcontroller.

In general, there was a problem that at a speed of over 120 km/h, the air suspension dropped into an error for all 4 level sensors, when dropping below 120 km/h, all errors disappeared. It was decided to reflash the unit. It contains 2 Motorola microcontrollers. Xhorse VVDI Prog programmer can flash and read them.

General appearance

Connect module with vvdi prog.

Read and write Motorola MC912D60 secured chip.

Updated!
The firmware flash helped! There are no errors when increasing the speed. I was driving at 160 km/h and the car dropped to the first position.

www.vvdishop.com

12. August 2024.

Where to Get Points for VVDI MLB Tool?

Xhorse VVDI MLB Tool will program VVDI MLB key and original MLB key. It does not consume points when using VVDI MLB keys. But it does require 200 points when calculating data using the original MLB key.

Some customers asked how to get points for the MLB-Tool. Here is the clue.

Combine your VVDI MLB Tool with your Xhorse account in App first, the device will automatically deduct the points from the account when calculating online.

You don’t need to transfer points to the MLB-tool device. It will automatically deduct points from your account.

If your Xhorse account does not have any points, you can obtain points by generating brand new Xhorse universal remote keys.

How to get Xhorse Bonus Points from VVDI Remotes?

9. August 2024.

VVDI PROG VW Polo MQB Adapter Try Frequency Failed

How to read immo data from a Volkswagen Polo of cluster using the Xhorse VVDI PROG + MQB48 Solder Free Adapter? Initially, I’ve met an “Try Frequency failed(00)” error that prevented successful data extraction. But after some troubleshooting, I was able to identify and fix the issue.

The following are the procedure:

Open the VVDI PROG software,

Type: 5-DASHBOARD

Brand: VOLKSWAGEN

Chip: MQB-LOCK(D70F3526)-READ(ADAPTER)

Follow the diagram to install MQB board & the XDNP79 solder-free adapter, then connect to VVDI PROG and 12 volts power.

Click “Read”.

Unfortunately, we have an error here.

It says:”Try Frequency failed(00)”.

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 1

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 2

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 3

It took me long time with so many hours to find the solution for the error.

And now it’s very easy.

Just take a separate wire to connect the VVDI PROG for 3.3 volts and clamp FLMDO pin on the adapter.

Make sure you don’t touch any other pins.

Let’s try to read again.

If all the pins are touching correctly the board now, we should read the immo data.

This may take about 10 minutes……

Reading success.

Save the data file.

Disconnect all the 12 volts & VVDI PROG, let’s connect to VVDI2.

Open VVDI2 software,

Key learn >> MQB platform instrument immobilizer >> Instrument with locked NEC35xx(MQB48, VDO/JCI)

Decode immo data >> Yes >> Upload the saved file

Press OK to save MQB48 immo data file.

Now you’ve successfully got the MQB immo file, it can be used for key adding.

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 7

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 8

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 9

VVDI PROG XDNP79 Read VW Polo MQB Try Frequency Failed 10

www.vvdishop.com

8. August 2024.

How to Fix VVDI Key Tool Plus ‘No Device Language List’ Error

Problem:

One of our customers reported that his Xhorse VVDI Key Tool Plus has no response, press any function button always show the same error “No Device Language List”.

Press Setting icon, still the same. Don’t allow to change language setting.

VVDI Key Tool Plus ‘No Device Language List 1

Solution:

Swipe up on the screen, exit the app, and try again.

Feedback:

Yes, it is working.

www.vvdishop.com

7. August 2024.

How to Solve VVDI MLB Tool Key Data Calculation Failed Error?

Problem:

One of our customers tried to add a spare key to Audi Q7 2020 with the Xhorse VVDI MLB Tool. However the tool failed to collect key data.

Error “Key data calculation failed”.

Xhorse VVDI MLB Tool Key Data Calculation Failed

Common Issues with Collection Failures

VCC1 and VCC2 are reversed.
The capacitors were removed incorrectly or not removed.
Short circuit in soldering.
Data collection requires wireless reading of the key simultaneously; if the key is not positioned correctly, it will not be detected.

Check the above and collect key data again.