Xhorse VVDI Tools Software and Hardware

22. May 2024.

Xhorse Multi Prog Adds VAG CONTINENTAL SIMOS18.3

Xhorse Multi Prog ECU and TCU programmer released new database version V24 on May 20th, 2024.

Multi-Prog V24
2024-05-20 21:01:28
* Fix the FAW BCM-3(MC9S12G128) option in <OTHER-><FAW>-><FAW>
* Fix chip read exception problem in MPC556X and MPC555X series chip
* Fix the R7F701312 option failed to set the vibration frequency
* Fix the MC68HC711E9 and MC68HC11E9 option connection failure problem
* Fix some ME7.5 ECU connection failure problem and optimize the process
* Update the Great Wall air bag wiring diagram
+ The models of the read and write function modules that support Boot mode on the ECM are as follows：
1.VAG_CONTINENTAL_SIMOS18.3
+ Add R7F701331
option in
<MCU>-><RENESAS>-><RH850>
+ Add ST72321AR6,
ST72321AR7,
ST72321AR9,
ST72321J7,
ST72321J9,
ST72321R6,
ST72321R7,
ST72321R9,
ST72521BAR6,
ST72521BAR9,
ST72521BM9,
ST72521BR6,
ST72521BR9,
ST72F321AR6,
ST72F321AR7,
ST72F321AR9,
ST72F321J7,
ST72F321J9,
ST72F321R6,
ST72F321R7,
ST72F321R9,
ST72F521AR6,
ST72F521AR9,
ST72F521M9,
ST72F521R6,
ST72F521R9
options in
<MCU>-><ST>-><ST72XXX>
+ Add HC908EY16,
HC908GP32,
HC908GP32_UNLOCK_ERASE,
HC908JB16,
HC908JB16_UNLOCK_ERASE,
HC908QT1,
HC908QT2,
HC908QT4,
HC908QY1,
HC908QY2,
HC908QY4,
HC908Qxx_UNLOCK_ERASE options in <MCU>-><Motorola>-><MC68HC(9)08>
+ Add DELPHI_MT62.1 option in <ECU>-><BAIC>-><HYOSOW>
+ Add ACDelco GM E83 MPC5565 JTAG option in <ECU>-><BUICK>-><Regal>
+ Add NETA U BCM(SPC5744B) option in <OTHER>-><NETA>-><NETA>
+ Add W212 EPS(MC9S12XEG128) option in <OTHER>-><Mercedes>-><Mercedes>
+ Add Cayenne Steering Gear (2018-)(SPC56EL60) option in<OTHER>-><PORSCHE>-><PORSCHE>
+ Add VOLKSWAGEN-STEERING-COLUMN(R7F701312)option in <OTHER>-><VOLKSWAGEN>-><VOLKSWAGEN>
+ Add SERES AITO SF5 EPS option in <OTHER>-><SERES>-><AITO>

Press Update Online tab to update software, firmware and database.

Multi Prog pinout to VAG Simos 18.3

Supported models: Audi A3, VW Lamando, VW Teramont, VW Altlas, Skoda Superb

Working mode: Boot

Xhorse Multi Prog Adds VAG SIMOS 18.3 ECU 2

Xhorse Multi Prog Adds VAG SIMOS 18.3 ECU 3

Xhorse Multi Prog Adds VAG SIMOS 18.3 ECU 4

www.vvdishop.com

21. May 2024.

Xhorse Dolphin XP005 Decode and Cut Ford HU198T Key Blank

We have a customer who successfully decoded and cut 2022 Ford Maverick HU198T key blank with Xhorse condor ii under Escape HU198T.

Here is another way to decode and cut new HU198T key blank if you don’t know decode under Escape HU198T.

It is a 2024 Ford Mavericks. It has new HU198T key blank.

Let’s control the Xhorse Dolphin XP005 key cutting machine by the VVDI Key Tool Plus.

Go to Cut key-> Vehicle database
If selected by model Ford->Maverick, no 2024 HU198T is available. So we cannot go by car.

We scroll down All key blank. There are 4 HU198Ts. The difference is the depth.

Decode 2024 Ford new HU198T Key with Xhorse Dolphin XP005 1

Decode 2024 Ford new HU198T Key with Xhorse Dolphin XP005 2

All 4 of them say 10bits, this one if we go into it we can see down here it has five depths.
Another one has four depths.

Decode 2024 Ford new HU198T Key with Xhorse Dolphin XP005 3

We are not sure about which to choose. What happens if you decode it with the wrong key blank.

For example, let’s decode under 4 depths.
What it decodes is wrong.

If we go find bitting, it is not going to come up with anything.

Decode 2024 Ford new HU198T Key with Xhorse Dolphin XP005 6

Decode 2024 Ford new HU198T Key with Xhorse Dolphin XP005 7

Then we go to the 5 depths, the bitting the same.
But try find bitting, still no data.

Let’s select 1st one that also 5 depths.
Still got the same bitting.
If we go to find bitting, we got the key code this time.

Decode 2024 Ford new HU198T Key with Xhorse Dolphin XP005 11

That’s correct.

We can cut key by Dolphin XP005 with the key code.

What is the difference between the 2 five depths?
Looking at those little numbers down next to 12345.

One has little number and one does not. That’s the difference.

If you want to be safe, find one you know if you are decoding an existing key and you don’t have the vantage of having a code.
Do a little trial and error and if you find one that spits out a code when you hit the find bitting button, it is pretty safe to say that you got the right one.

www.vvdishop.com

20. May 2024.

Xhorse Multi Prog Read and Write Audi Simos 18.1

Xhorse Multi Prog programmer new user feedback: Simos 18.1 read/write perfectly.

It is an Audi A1.
Select VAG Continental SIMOS18.1 protocol
Working mode: Boot mode.

Multi-prog will show the wiring diagram.
Read INT eeprom in 43s.
Read INT Flash in 4m 2s.
Need extra power supply 14V+

Read and Write VAG SIMOS 18.1 with Xhorse Multi Prog 1

Read and Write VAG SIMOS 18.1 with Xhorse Multi Prog 2

Read and Write VAG SIMOS 18.1 with Xhorse Multi Prog 3

17. May 2024.

How to Solve Xhorse Dolphin XP005 Error Code 29

Problem:

When using Xhorse Dolphin XP005 universal key duplication function, it displayed error code 49. How to fix it?

Solution:

Just as it said, do Height level adjustment and clamp calibration before cutting.

How to do height level adjustment?

•Click Device Info at the bottom
•then click “Height Level Adjustment”
•Next you will want to READ the onscreen directions and follow them exactly.

Xhorse Dolphin XP005 Error Code 49 Solution 2

Xhorse Dolphin XP005 Error Code 49 Solution 3

16. May 2024.

Xhorse Multi Prog Adds VAG Simos 18.1 18.6 18.7 in Boot Mode

Xhorse Multi Prog ECU TCU programmer released new database on May 13th, 2024.

Database V23

Software V1.1.5.0

Multi-Prog V23
2024-05-13 20:52:46
* Optimize the MAC7116 option read and write process
* Update the option R7F701330 wiring diagram
* Update the option GEELY-NL-3(R7F701A03) and GEELY-DNL-5(R7F701A03) wiring diagram
* Add STM32 series lock, unlock erase and encryption judgment functions
* Update all series wiring diagrams in <MCU>-><Microchip>
* Add pic16f88x series EEPROM partition in <MCU>-><Microchip>-><pic16>
* Update SPC563MXX series chip wiring diagram
+ The models of the read and write function modules that support Boot mode on the ECM are as follows：
1.VAG_CONTINENTAL_SIMOS18.1
2.VAG_CONTINENTAL_SIMOS18.6
3.VAG_CONTINENTAL_SIMOS18.7
+ Add TC27X-40F, TC27X-40F(JTAG) options in <MCU>-><Infineon>-><TC2XXX>
+ Add MC9S12KL64_SECURED,
MC9S12KL64_UNSECURED,
MC9S12KL128_SECURED,
MC9S12KL128_UNSECURED,
MC9S12XDG256_SECURED,
MC9S12XDG256_UNSECURED,
MC9S12XDG512_SECURED,
MC9S12XDG512_UNSECURED options in <MCU>-><Motorola>-><MC9S12>
+ Add MC68HC912DT128C_SECURED,
MC68HC912DT128C_UNSECURED,
MC68HC912DG128C_SECURED,
MC68HC912DG128C_UNSECURED,
MC68HC912DG128P_SECURED,
MC68HC912DG128P_UNSECURED,
MC68HC912DJ128A_SECURED,
MC68HC912DJ128A_UNSECURED,
MC68HC912D60C_SECURED,
MC68HC912D60C_UNSECURED,
MC68HC912D60P_SECURED,
MC68HC912D60P_UNSECURED options in <MCU>-><Motorola>-><MC68HC(9)12>
+ Add HC908KX2, HC908JL16, HC908JL16_UNLOCK_ERASE, HC908JL8 options in <MCU>-><Motorola>-><MC68HC(9)08>
+ Add MC9RS08KA1,
MC9RS08KA2,
MC9RS08KA4,
MC9RS08KA8,
MC9RS08LA8 options in <MCU>-><Motorola>-><MC9S08>
+ Add MC68HC05B6(0B91T),
MC68HC05B8,
MC68HC05B16,
MC68HC705B32 options in <MCU>-><Motorola>-><MC68HC(7)05>
+ Add LONKING_FORKLIFT_INSTRUMENT(PIC16F887) option in <DASHBOARD>-><Lonking>-><Lonking>
+ Add NFINITI Q50(MC9S12XEP100_UNSECURED) option in <IMMOBILIZER>-><Infiniti>-><Infiniti>
+ Add Trumpchi GS3 POWER AIRBAG(R7F701A03)-LOCK-READ, Trumpchi GS3 POWER AIRBAG(R7F701A03)-LOCK-WRITE options in <AIRBAG>-><GACMOTOR>-><Trumpchi>
+ Add Monjaro AIRBAG(R7F701330)-LOCK-READ, Monjaro AIRBAG(R7F701330)-LOCK-WRITE options in <AIRBAG>-><GEELY>-><GEELY>
+ Add Geely Radorsensor(0N72D) option in <OTHER>-><GEELY>-><GEELY>

Xhorse Multi Prog Adds VAG Simos 18.1, 18.6, 18.7 in Boot

15. May 2024.

How to Add Nissan Qashqai J10 2010 Smart Key by VVDI Key Tool Plus

Problem:

Customer brought me his Nissan Qashqai J10 model from 2010. He could not start the car.
Car has the I-Key system (Keyless). Smart keys have integrated mechanical flip-keys.
They look like that

Nissan Qashqai J10 2010 Key Not Start solution

So, when I open the flip-key and put it into ignition, car starts, but no remote locking/unlocking and no keyless start is possible. I-Key module is completely dead, I can’t connect to it. When I connect second-hand I-Key module, diagnostic connects, I get the red “key” lght on dash, meaning that key is not paired to I-Key module. I have VVDI2, VVDI Key Tool Plus, SMOK and AVDI. None of those tools want to write keys to the used I-key module. I think it must be programmed and paired to the BCM first. But I can’t do this with any tool. When I opened the I-Key module, I don’t see any EEPROM. Only Fujitsu MCU. It’s based on MB90F347A processor.

PROBLEM SOLVED:

After few hours I was able to start the car with my tools. Old I-Key module was completely dead and I had no luck in reading the MCU. So I decided to give it another try today. I connected used module, tried to program it to the car, but AVDI and VVDI was giving me errors while programming the keys. I started to look for a solution, and I found out, that if there is any active DTC connected to IMMO system in any of IMMO related modules. I had active P1610 – ECU in locked state.
So I had to take care of it first. As I could start the car if I used mechanical key in ignition module. So I started the car, left it to idle for about 10 minutes. DTC turned to inactive and I could erase it. Afterwards I just had to erase smart keys and program them. VVDI key tool plus did the trick without any problem afterwards. Now remotes and keyless start is working like a charm.

13. May 2024.

Xhorse Multi Prog Firmware Update Error Solution

Problem:

Trying to update Xhorse Multi Prog firmware online, but failed, it reported a file write error, and instruction timeout.

Solve Xhorse Multi Prog Failed to Update Firmware 1

Solve Xhorse Multi Prog Failed to Update Firmware 2

Solve Xhorse Multi Prog Failed to Update Firmware 3

Solution:

Delete multiprog software and install again.

Then run firmware update.

If had any problem with multi prog, send Diagnostic report to Xhorse engineer.

www.vvdishop.com

11. May 2024.

Program BMW M1000RR All Keys Lost with VVDI Key Tool Plus

Program BMW M1000RR motorcycle all keys lost with xhorse vvdi key tool plus successfully.

Chip type: 4D+

Need to activate BMW motorcycle license in key tool plus.

Go to Immo programming->BMW->Select from system->BMW motorcycle key learning->Key function, Start programming.

The key need to unlock, so it need pre-process that means we need to unlock the unit

Unlock X_SLZ/X_EWS.

Read key and learn key.

Image attached:

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 1

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 2

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 3

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 4

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 5

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 6

Program BMW M1000RR Motor All Keys Lost by VVDI Key Tool Plus 7

10. May 2024.

VVDI Key Tool Max PRO Renew 2020 Nissan Maxima Smart Key

Today I’m going to show how to unlock 2020+ Nissan Ultima or Maxima smart key with Xhorse VVDI Key Tool Max/ Key Tool Max PRO. When a Nissan OEM smart key is used on a vehicle, you’re not able to reuse it on a different car. Its circuit board will lock up. But with the Key Tool Max, you can renew or unlock the key. Now let’s get start.

As we can see, the circuit board is Locked now.