Xhorse VVDI Tools Software and Hardware

6. June 2024.

VVDI Key Tool Plus Program Benz E320 2009 W211 BE Key

Mercedes Benz E320 2009 W211: Xhorse VVDI Key Tool Plus added a new 2 button aftermarket BE key, position #6, disabled #1 lost key. All done in 20 minutes. The calculation took only about 5 minutes! Cost 1 free token. Great job Xhorse!

The customer wanted 1 new key with 2 buttons. He’s lost the #1 key. The #2 key is still in his possesion. But he isn’t sure whether the #1 key is just somewhere hidden in the household. So I decided to disable #1 key to be able to enable it if the key should appear somehow somehere. And just added the new spare key to the system. All keys lost would be an unnecessary waste of 2 tokens instead of 1. And a risk.

Xhorse VVDI Key Tool Plus Adds Benz E320 2009 W211 Key 1

Xhorse VVDI Key Tool Plus Adds Benz E320 2009 W211 Key 2

Xhorse VVDI Key Tool Plus Adds Benz E320 2009 W211 Key 3

Xhorse VVDI Key Tool Plus Adds Benz E320 2009 W211 Key 5

Xhorse VVDI Key Tool Plus Adds Benz E320 2009 W211 Key 6

5. June 2024.

Generate GM 4A Key with VVDI Super Chip XT27A or XT27B

Question:

Can I generate a chip control for a 2016 Chevrolet Beat with xhorse vvdi key tool max and vvdi super chip? Is a 4A chip.

Can Xhorse Generate Chevrolet 4A Key by Super Chip 1

Answer:

Yes you can generate GM 4A chip with super chip, but need super chip XT27B not XT27A.

You can do 4A with Xhorse B5 Super XT27B Universal Remote Key 3 Button – XEB510EN.

3. June 2024.

Xhorse Multi-Prog Failed to Load S0 Error Solution

Problem:

Xhorse Multi Prog failed to read a Kia MEG17.9.12 ECU.

Error “Failed to load S0. Error code ffff55aa, the number of times used is 0.”

Any idea?

Xhorse Multi Prog Failed to load S0 Error 1

Xhorse Multi Prog Failed to load S0 Error 2

Solution:

Just as multi prog software said, sync device and try again.

Go to Update Online tab-> Authorization management and sync device.

Xhorse Multi Prog Failed to load S0 Error 4

31. May 2024.

How to Add 2024 Lexus RX500H Key with VVDI Key Tool Plus

Today I’m going to quickly show how to add 2024 Lexus RX500H smart key with Xhorse VVDI Key Tool Plus + Toyota BA AKL Cable by OBD. The cable can also work with VVDI Key Tool Max Pro for 2022- Toyota BA key programming.

Xhorse VVDI MLB Tool Software Free Download

Where to download Xhorse VVDI MLB Tool software?

VVDISHOP.COM here provides software download free link on mega

VVDI MLB Tool software free download

Current software version: 1.0.3.0

Language: English, Chinese

Update: update online (check Update Online tab)

Operating system: Windows 10, Windows 11

NOTE: You need to bind MLB Tool with Xhorse App to perform immo data online calculation.

Go to Special Function->Bind device, scan QR code to bind device with xhorse app.

There are 3 steps to calculate MLB immo data with the VVDI MLB Tool:

1.Identify key

Place the key in the device identification area for identification.

2.Collect key data

Open the original MLB key, connect the original car key PCB as shown in the diagram, click Collect Key data button after connection. The server takes approximately 10 seconds to calculate.

Save the calculation data when it completed.

3.Make dealer key

Load the saved data above and generate dealer keys.

Then use VVDI2 and VVDI Key Tool Plus to learn key.

VVDI MLB Tool MLB Wiring Diagram Type 1 to Type 6

No need to remove chip. But need to remove two capacitors (100nF) and solder cable to original key according to different color as diagram.

Type 1 Audi/Lamborghini

Type 2: Audi Lamborghini

Type 3: Audi Bentley

Type 4 Porsche

Type 5 Porsche

Type 6 VW

29. May 2024.

How to Duplicate Dimple Keys by Xhorse Condor XC-002 Pro

The upgraded version Xhorse Condor XC-002 Pro manual key cutting will duplicate dimple, double sided, single sided, 4 track external, 2 track external, 4 track internal, channel track keys. Here we will show how to cut a dimple key with condor xc-002 pro.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 1

1. Insert the internal dimple probe and cutters

2. Insert the original key and the blank key using a shim

3. Rotate the knob to standard mode

4. Calibration. Follow the direction of the light until the middle light turns green

Cut Dimple Keys by Xhorse Condor XC-002 Pro 6

Make sure the clamp is in the corresponding position.

Turn on the cutter switch.

5. Duplicate the key
Press down the main handle to duplicate the key.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 10

Turn off the switch after finishing one side cutting.
Clip the key and continue to cut the other side.

After finishing cutting the other side, turn off the switch and clean up.

6. Insert the dimple probe and cutter (external) to Xhorse Condor XC 002 pro.

Replace the internal dimple probe and cutter with external ones.

7. Switch the konb to dimple mode

8. Insert the keys
9. Finish the calibration.
Clamp the keys and finish calibration.

10. Duplicate the key
Turn on the cutter switch to cut key.
After finishing one side, turn off the switch.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 16

Clip the key and continue to cut the other side.

After finishing cutting the other side, turn off the switch and clean up.

Now we have a working dimple key.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 18

www.vvdishop.com

28. May 2024.

How to Use VVDI MLB Tool to Add Audi MLB Key

Xhorse VVDI MLB Tool is a newly launched MLB programmer to add spare key to VW, Audi, Porsche, Bentley, Lamborghini etc. The MLB-Tool itself is used to calculate MLB immo data online. You have to use VVDI2 or VVDI Key Tool Plus with the MLB Tool to program keys.

How to use VVDI MLB Tool with VVDI2/VVDI Key Tool Plus?

Main steps:

1.Read Key information

2.Calculate immo data

3. Generate dealer key

4. Learn key

1.Read key information

Make sure your vvdi2 has VV-02 VAG IMMO5 and VV-05 MQB licence activated.

Run VVDI2 or Key Tool plus, go to Main menu->Key Programming->MLB key programming

Read vehicle information

2.Calculate IMMO Data with VVDI MLB Tool

Step 1: Connect the MLB Tool adapter to the PC via a USB cable (No Need to use OTG adapter)

Place the original key on the sensing area of the MLB device. and run the MLB software.
Put the original key on the sensing area for detection.

Step 2:
Follow the software’s tips to confirm that the key type is supported.
Then remove the shell of the original key, take out the PCB and perform the relevant welding operation following the instructions.
After the welding is completed, plug the welding harness into the VVDI MLB tool adapter, at the same time, place the key in the center of the sensing area.

Step 3:
Select “Collect Key Data” in the software to collect and calculate the data online

If need to use the original key ID, first read the vehicle information to get the ID and then use the Modify Key ID function to change ID.

NOTE 1: If original key ID is FFFFFFF, you can change ID only once.

3.Generate dealer key

Select Generate a dealer key

Load MLB immo data saved to generate dealer key

3.Learn key with VVDI2 or VVDI Key Tool Plus

English instruction will be available soon.

www.vvdishop.com

How to Use Xhorse VVDI MLB Tool with VVDI2 or VVDI Key Tool Plus?

27. May 2024.

Will Xhorse Multi Prog Unlock VAG Simos PCR2.1?

Xhorse Multi Prog new user feedback:

Successfully read VAG Simos pcr2.1 ECU on bench.

Last time failed with this Ecu, and I noticed a issue with multi prog power adapter.
That 4 amps charger is fully induction (a/c noise in out put) once connect my usb cable to pc, mouse pad also stock due to multi prog SMPS noise.
Just connect with my old Power supply and everything works.
That ecu already bench read by fc200 so there’s no need unlock.

Checksum by multiprog.

I didn’t unlock anything …I just read flash in bench the write mod file. It reads full flash data.

pcr2.1 when start read go to 3-4amps in sec.

Xhorse Multi Prog Read and Write VAG Simos PCR2.1 1

Xhorse Multi Prog Read and Write VAG Simos PCR2.1 2

24. May 2024.

VVDI Key Tool Plus Program 2019 Peugeot 2008 XM38 Smart Key

This is a tutorial on how to add a 2019 Peugeot 3008 proximity key with Xhorse VVDI Key Tool Plus by OBD. Please learn the procedure below step by step.

Tools Required

Xhorse VVDI Key Tool Plus

XM38 Smart Key or XZPG00EN Special Smart Key for Peugeot Citroen DS

Battery Maintainer

Use a maintainer to keep the battery stable.
Connect VVDI Key Tool Plus to the OBD port of the vehicle.

Operation

Remote program >> Europe >> Peugeot >> 3008 >> 3008(2016+) Remote FSK ID4A >> Generate

Writing data, please wait…

Burn success.

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 1

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 2

IMMO programming >> Europe >> Peugeot >> Password reading >> Type 3 CAN(adding) >> Start programming >> Read password

Please make sure ignition switch is at OFF status.

Switch ignition off and wait for 5s, then switch on, keep repeating this process.

Password has been read out.

Take note of the password. You’ll need it afterwards.

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 3

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 4

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 5

Select by model >> Peugeot >> 3008 >> With smart >> Start programming >> Start keys programming

Please turn on double flash lamps(security warning light).

Note: the wrong password will be forbidden to match!

Please enter the password

Place the wanted programming smart key into sensing coil

(In the smart key slot inside the glove box under start button or at the key sign at the bottom left of steering wheel)

Note: If there is a key that can start the car, insert the key first.

Current key match successfully.

Whether to continue to match next one? Yes.

Please remove the smart key, put the next wanted programming smart key into the sensing coil position.

Program complete!

Start the vehicle after each key performs the following operations:

Insert the smart key to the card slot.
Switch ignition to ON(do not start the car) and wait for 3s then switch off, then remove the smart key and click LOCK button for 5s…

Note: If the remote still can not use after performing the above operations, try the following operations:

Remove the smart key, switch ignition on for 3s then switch off, then click LOCK button for 5s.
Leave the key near the induction coil inside the car, close the door, and wait for 30 minutes.

Test the new key, it can work.

Perfect done!

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 6

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 7

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 8

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 9

Xhorse VVDI Key Tool Plus Add 2019 Peugeot 3008 4A Smart Key 10

www.vvdishop.com

23. May 2024.

Xhorse MQB Adapter D70F3532 Write Error 00 Solution

Problem:

Tried to read VAG MQB D70F3532 cluster with xhorse vvdi prog and MQB solder free adapter, read works, write does not. Software says write error (00). Any solution?

Xhorse MQB Adapter Read ok, Write Error 00 1

Xhorse MQB Adapter Read ok, Write Error 00 2

Xhorse MQB Adapter Read ok, Write Error 00 3

Solution:

1.Make sure your vvdi prog software is up-to-date.

2. If reads ok, write does not, use a hot gun to heat the chip with a temperature 200 degrees (Do not exceed 350 degrees).

3. If still fails, then use cut pin method to read/write this cluster.